Contents Wiring diagrams Section: Windows All sections

Power Windows: Diagnosis Toyota 4Runner III

Windows ~312 words

TROUBLE SHOOTING

Note. Trouble shooting available for Land Cruiser and RAV4 models only. For connector views for trouble shooting diagnostic steps, see CONNECTOR VIEWS .

POWER WINDOW SWITCH CONTINUITY TEST (DRIVER'S SWITCH)

Using an ohmmeter, check continuity between specified terminals with driver's power window switch in specified position. See appropriate DRIVER'S POWER WINDOW SWITCH CONTINUITY TEST table. (Схема №6)- (Схема №9). Continuity should be present, except at those terminals specified by a footnote. If continuity is not as specified, replace power window switch. If continuity is as specified, switch is okay.

Application & Switch Position(1) Terminals No.
Driver's Switch
Locked & Unlocked
UP1 & 3; 2, 4 & 5
OFF1, 2, 4 & 5
DOWN1, 4 & 5; 2 & 3
Passenger's Switch
Locked
UP7 & 10
OFF7 & 8
DOWN8 & 10
Unlocked
UP4, 5, 8; 7 & 10
OFF4, 5, 7 & 8
DOWN4, 5, 7; 8 & 10
Left Rear Switch
Locked
UP9 & 10
OFF9 & 11
DOWN10 & 11
Unlocked
UP4, 5 & 11; 9 & 10
OFF4, 5, 9 & 11
DOWN4, 5 & 9; 7, 10 & 11
Right Rear Switch
Locked
UP10 & 13
OFF13 & 14
DOWN10 & 14
Unlocked
UP4, 5 & 14; 10 & 13
OFF4, 5, 13 & 14
DOWN4, 5 & 13; 10 & 14
(1) (Схема №7)
(1)(Схема №7)

DRIVER'S POWER WINDOW SWITCH CONTINUITY TEST (LAND CRUISER)

Application & Switch Position(1) Terminals No.
2-Door
Driver's Switch
Locked & Unlocked
UP3 & 5; 4 & 6
OFF3, 4 & 5
DOWN3 & 4; 5 & 6
Passenger's Switch
Locked
UP12 & 13
OFF12 & 14
DOWN13 & 14
Unlocked
UP3 & 14; 12 & 13
OFF3, 12 & 14
DOWN3 & 12; 13 & 14
4-Door
Driver's Switch
Locked & Unlocked
UP1 & 3; 2, 4 & 5
OFF1, 2, 4 & 5
DOWN2 & 3; 1, 4 & 5
Passenger's Switch
Locked
UP7 & 10
OFF7 & 8
DOWN8 & 10
Unlocked
UP4, 5 & 8; 7 & 10
OFF4, 5, 7 & 8
DOWN4, 5 & 7; 8 & 10
Left Rear Switch
Locked
UP9 & 10
OFF9 & 11
DOWN10 & 11
Unlocked
UP4, 5 & 11; 9 & 10
OFF4, 5, 9 & 10
DOWN4, 5 & 9; 10 & 11
Right Rear Switch
Locked
UP10 & 13
OFF13 & 14
DOWN10 & 14
Unlocked
UP4, 5 & 14; 10 & 13
OFF4, 5, 13 & 14
DOWN4, 5 & 13; 10 & 14
(1) For RAV4 (2-door) master switch terminal locations (Схема №6) For RAV4 (4-door) master switch terminal locations (Схема №7)
(1)For RAV4 (2-door) master switch terminal locations (Схема №6) For RAV4 (4-door) master switch terminal locations (Схема №7)

DRIVER'S POWER WINDOW SWITCH CONTINUITY TEST (RAV4)

Application & Switch Position(1) Terminals No.
Driver's Switch
Locked & Unlocked
UP1 & 4; 3 & 9
OFF1, 3 & 4
DOWN1 & 3; 4 & 9
Passenger's Switch
Locked
UP8 & 9
OFF8 & 10
DOWN9 & 10
Unlocked
UP1 & 10; 8 & 9
OFF1, 8 & 10
DOWN1 & 8; 9 & 10
(1) (Схема №9)
(1)(Схема №9)

DRIVER'S POWER WINDOW SWITCH CONTINUITY TEST (SIENNA & TUNDRA)

Application & Switch Position(1) Terminals No.
Driver's Switch
Locked & Unlocked
UP3 & 9; 4 & 6
OFF3, 4 & 6
DOWN3 & 6; 4 & 9
Passenger's Switch
Locked
UP9 & 10
OFF7 & 10
DOWN7 & 9
Unlocked
UP6 & 7; 9 & 10
OFF6, 7 & 10
DOWN6 & 10; 7 & 9
(1) (Схема №9)
(1)(Схема №9)

DRIVER'S POWER WINDOW SWITCH CONTINUITY TEST (TACOMA)

Application & Switch Position(1) Terminals No.
Driver's Switch
Locked & Unlocked
UP2 & 4
DOWN1 & 4
Left Rear Switch
Locked
UP(2) 11 & 4
DOWN(2) 9 & 4
Unlocked
UP11 & 4
DOWN9 & 4
Right Rear Switch
Locked
UP(2) 14 & 4
DOWN(2) 13 & 4
Unlocked
UP14 & 4
DOWN13 & 4
(1) (Схема №7) (2) Continuity does not exist at these terminals.
(1)(Схема №7)
(2)Continuity does not exist at these terminals.

DRIVER'S POWER WINDOW SWITCH CONTINUITY TEST (4RUNNER)

POWER WINDOW SWITCH CONTINUITY TEST (PASSENGER'S & REAR SWITCHES)

Using an ohmmeter, check continuity between specified terminals with power window switch in specified position. See POWER WINDOW SWITCH CONTINUITY TEST (PASSENGER'S & REAR) table. (Схема №10)(Схема №11) or (Схема №12). If continuity does not exist at specified terminals, replace appropriate power window switch.

Application & Switch Position(1) Terminals No.
Land Cruiser
Passenger's & Rear Switch
UP1 & 2; 3 & 4
OFF1 & 2; 3 & 5
DOWN1 & 4; 3 & 5
Rear Quarter Panel Window Switch
CLOSE3 & 6; 4 & 5
OFFNone
OPEN3 & 4; 5 & 6
Illumination Circuit1 & 2
RAV4
Front Switch
UP1 & 2; 3 & 4
OFF1 & 2; 3 & 5
DOWN1 & 4; 3 & 5
Rear Switch
UP1 & 2; 3 & 4
OFF1 & 2; 4 & 5
DOWN2 & 3; 4 & 5
Sienna
Front Switch
UP1 & 2; 3 & 4
OFF1 & 2; 3 & 5
DOWN1 & 4; 3 & 5
Rear Quarter Panel Window Switch
CLOSE3 & 7; 8 & 9
OFF6 & 7; 8 & 9
OPEN3 & 8; 6 & 7
Illumination Circuit1 & 5
Tacoma & Tundra
UP1 & 2; 3 & 4
OFF1 & 2; 3 & 5
DOWN1 & 4; 3 & 5
4Runner
UP6 & 12
DOWN1 & 12
(1) (Схема №10), (Схема №11) or (Схема №12).
(1)(Схема №10), (Схема №11) or (Схема №12).

POWER WINDOW SWITCH CONTINUITY TEST (PASSENGER'S & REAR)

INTEGRATION RELAY CIRCUIT TEST

Note. Diagnostic procedures for integration relay circuit is not available.

POWER WINDOW SWITCH POWER SUPPLY TEST

Note. Testing for Land Cruiser, RAV4 and Tacoma is not available.

POWER WINDOW SWITCH GROUND TEST

Note. Testing for Land Cruiser, Tacoma and RAV4 is not available.

Disconnect power window switch connector. Check for continuity between appropriate power window switch harness connector terminal and ground. See POWER WINDOW SWITCH GROUND TEST table. Continuity should be present at all times. If continuity is not present, repair open in ground circuit.

Application & SwitchTerminals No.
Sienna
Driver Power Window Master Switch (1)1
Rear Quarter Power Window Switch (2)6 & 9
Tundra
Driver Power Window Master Switch (1)1
4Runner
Driver Power Window Master Switch (3)4
Passenger Power Window Switch (4)12
(1) For switch terminal location (Схема №9) (2) For switch terminal location (Схема №11) (3) For switch terminal location (Схема №7) (4) For switch terminal location (Схема №8)
(1)For switch terminal location (Схема №9)
(2)For switch terminal location (Схема №11)
(3)For switch terminal location (Схема №7)
(4)For switch terminal location (Схема №8)

POWER WINDOW SWITCH GROUND TEST

POWER WINDOW SYSTEM CURRENT TEST

Note. System circuit breaker opens 4-40 seconds after window operation stops. Ensure circuit test is performed before circuit breaker operates.