Power Windows: Other Suzuki X-90 I

SOME SWITCHES DO NOT OPERATE

Remove suspect control switch from door panel. Perform appropriate component test. See COMPONENT TESTS . If switch does not test okay, replace suspect switch assembly.

ONLY ONE MOTOR DOES NOT OPERATE

1. Turn ignition on. Access malfunctioning motor. Disconnect harness connector. While pressing main window switch in UP position, check voltage at Yellow wire terminal of harness connector. If voltage is not present, inspect and repair circuit as necessary. See «WIRING DIAGRAMS»(ref-37606-S09034426832001010900000) .
2. If voltage is present, check voltage at Red wire terminal of harness connector while pressing main window switch in DOWN position. If voltage is not present, inspect and repair circuit as necessary. If voltage is present in both tests, replace motor.