Power Windows: Diagnosis Suzuki X-90 I

COMPONENT TESTING

Note. Component testing is not available from manufacturer at time of publication.

1. Turn ignition on. Ensure fuse is okay. Replace fuse as necessary. Locate circuit breaker. (Схема №1) Ensure battery voltage is present at both circuit breaker terminals. If voltage does not exist at either terminal, inspect and repair circuit as needed. See «WIRING DIAGRAMS»(ref-37606-S09034426832001010900000).
2. Remove power window main switch. Using voltmeter, ensure voltage is present at harness connector Blue/White wire. If voltage does not exist, inspect and repair circuit as needed.
3. If voltage exists, ensure continuity exists between switch harness connector Black wire and vehicle ground.
4. If continuity exists, replace power window main switch. If continuity does not exist, inspect and repair circuit as needed.