Tightening Torque Specifications
| CAUTION | For fastener with * (asterisk) below, be sure to tighten it according to specified procedure in "Repair Instructions". |
| Fastening part | Tightening torque | ||
|---|---|---|---|
| N.m | Kgf-m | Lbf-ft | |
| Transfer oil level/filler plug | 23 | 2.3 | 17.0 |
| Transfer oil drain plug | 23 | 2.3 | 17.0 |
| Transfer oil temperature sensor | 12 | 1.2 | 9.0 |
| Transfer stiffener bolt* | 55 | 5.6 | 40.5 |
| Transfer bolt | 88 | 9.0 | 65.0 |
| Transfer nut | 88 | 9.0 | 65.0 |
| Transfer output flange nut | 100 - 300 | 10.2 - 30.6 | 74.0 - 221.5 |
| Oil pump outer cover bolt | 8.0 | 0.82 | 6.0 |
| Transfer case bolt | 23 | 2.3 | 17.0 |
| Transfer output retainer bolt | 55 | 5.6 | 40.5 |
TIGHTENING TORQUE SPECIFICATIONS
Note. The specified tightening torque is described in the following.
Reference
For the tightening torque of fastener not specified in this section, refer to
- «TRANSFER ASSEMBLY COMPONENTS»(ref-585625-S40212381882013111200000)
- «FASTENERS INFORMATION»(ref-585605-S40472959762013111200000)