Cranking System Specifications
| Voltage | 12 V | ||||
|---|---|---|---|---|---|
| Output | 1.4 kW | ||||
| Rating | 30 seconds | ||||
| Direction of rotation | Clockwise as viewed from pinion side | ||||
| Number of pinion teeth | 8 teeth | ||||
| Performance | Voltage | Current | Torque | Revolution speed | |
| Around at 20 ° C (68 °F) | No-load characteristic | 11.0 V | 90 A MAX | 2000 rpm MIN | |
| Loaded characteristic | 7.5 V | 300 A | 11.0 N.m (1.1 kgf-m, 8.5 lbf-ft) minimum | 840 rpm MIN | |
| Locked characteristic | 3.0 V | 860 A MAX | 20.0 N.m (2.0 kgf-m, 15.0 lbf-ft) minimum | ||
| Magnetic switch operating voltage | 8 V or less | ||||
CRANKING SYSTEM SPECIFICATIONS
Tightening Torque Specifications
| Fastening part | Tightening torque | ||
|---|---|---|---|
| N.m | Kgf-m | Lbf-ft | |
| Starting motor cable nut | 11 | 1.1 | 8.5 |
| Starting motor mounting bolt | 45 | 4.6 | 33.5 |
| Brush holder screw | 3.5 | 0.36 | 3.0 |
| End housing bolt | 6.0 | 0.61 | 4.5 |
| Magnetic switch screw | 6.0 | 0.61 | 4.5 |
| Lead wire nut | 10 | 1.0 | 7.5 |
TIGHTENING TORQUE SPECIFICATIONS
Note. The specified tightening torque is described in the following.
Reference
For the tightening torque of fastener not specified in this section, refer to
- «STARTING MOTOR COMPONENTS»(ref-585581-S09821573252013111200000)
- «FASTENERS INFORMATION»(ref-585605-S40472959762013111200000).
See also:
• INSPECTION OF ECM AND ITS CIRCUITS