Scan Tool Data Definitions
| Vehicle Speed (KM/H, MPH) | This parameter indicates vehicle speed calculated by 4WD control module. |
|---|---|
| Actuator Pos Sen (Transfer shift actuator motor position switch) (4H/4H-lock/4Llock/N/4Hlock- 4H/4HN/N-4L-lock) | This parameter indicates transfer shift actuator motor position switch status detected by 4WD control module. |
| Actuator motor Pos (Transfer shift actuator motor position) (4H/4H-lock/4Llock/N) | This parameter indicates transfer shift actuator motor position detected by 4WD control module using transfer shift actuator motor position. |
| Battery voltage (V) | This parameter indicates battery voltage detected by 4WD control module. |
| 4L/N switch (ON/OFF) | This parameter indicates 4L/N switch status detected by 4WD control module. |
| Center diff lock Sw (ON/OFF) | This parameter indicates center differential lock switch status detected by 4WD control module. |
| N range signal (AT) (ON/OFF) | This parameter indicates A/T shift position ("N" range or not) detected by 4WD control module. |
| CPP switch (Clutch pedal position switch) (MT) (ON/OFF) | This parameter indicates clutch pedal position switch status detected by 4WD control module using CPP switch. |
| Mode switch 1 (Transfer switch) (ON/OFF) | ON: Transfer switch to N position. OFF: Transfer switch to other than N position. |
| Mode switch 2 (Transfer switch) (ON/OFF) | ON: Transfer switch to other than 4L-lock position. OFF: Transfer switch to 4L-lock position. |
| Mode switch 3 (Transfer switch) (ON/OFF) | ON: Transfer switch to 4H-lock or 4L-lock position. OFF: Transfer switch to 4H or N position. |
| Warning buzzer (OFF/N Pos/Error) | This parameter indicates if buzzer is being commanded by 4WD control module. |
| ABS active (ON/OFF) | This parameter indicates ABS status detected by 4WD control module. |
| ESP® active (ON/OFF) | This parameter indicates ESP® status detected by 4WD control module. |
SCAN TOOL DATA DEFINITIONS