Watertest Stand Specifications
| Application | Description |
|---|---|
| Nozzle Type | Full jet spray nozzle #1/2 GG-25 or equivalent with a 60° included angle |
| Nozzle Height | Approximately 1,600 mm (63.0 in.) from the floor |
| Volume of Flow | 14 L (3.7 gal) per minute |
| Pressure | 155 kPa (22.5 psi) measured at the nozzle |
| Windshield and A-pillar Test Stand Position | Approximately 30° down, 45° toward the rear, and aimed at the corner of the windshield |
| B-pillar Test Stand Position | Approximately 30° down, 45° toward the rear, and aimed at the center of the rear door |
| Back Window and Rear Deck Lid Test Stand Position | Approximately 30° down, 30° toward the front and aimed approximately 610 mm (24.0 in.) from the corner of the back window |
WATERTEST STAND SPECIFICATIONS
Tightening Torque Specifications
| Application | N.m |
|---|---|
| Glass Screws | 7 |
| Outside Rearview Mirror Assembly Screws | 4.5 |
| Rearview Mirror Mounting Bolt | 1.2 |
| Window Regulator Nuts | 8 |
| Rear Door Quarter Glass Nuts | 2.5 |
TIGHTENING TORQUE SPECIFICATIONS