Special Tools
You should be able to use a Digital Volt Meter (DVM), a circuit tester, jumper wires or leads and a line pressure gauge set.
The functional check procedure is designed to verify the correct operation of electronic components in the transaxle.
This will eliminate the unnecessary removal of transaxle components.
Special Tool
SPECIAL TOOL DESCRIPTION DW110-060 Engine Support Fixture DW260-020 Transaxle Holding Fixture DW260-010 Transaxle Support Fixture DW260-030-01 (LH) DW260-030-02 (RH) Axle Seal Installer DW260-050 Park/Neutral Position Switch Installer DW260-060 Brake F Split Stop Ring Remover/Installer DW260-070 Transaxle Fluid Plug Remover/Installer DW240-010 Universal Pressure Gauge Set DW260-150 Clutch E Stop Ring Remove/Installer DW260-140 Clutch B Stop Ring Remover/Installer DW260-160 Brake C/D Snap Ring Remover/Installer DW260-080 Clutch B/E Shim Setting Gauge DW260-120 Clutch B Adjust Ring DW260-130 Clutch E Adjust Ring DW260-100 Clutch B/E Disc Thickness Measuring Fixture DW260-090 Clutch B/E (Installation Space) Measuring Fixture DW260-110 Brake F Disc Clearance Measuring Bar
