General Specifications
| Application | Unit | Description | |
|---|---|---|---|
| Compressor | V5 | ||
| Receiver-Dryer | AL R/DRIER | ||
| Refrigerant | Type | R-134a System | |
| Capacity | G | 640 ± 20 (RHD: 690 ± 20) | |
| Refrigerant Oil in A/C System | Type | Union Carbide 488 PAG OIL (2006) ISUPAG 513 (2007) | |
| Capacity | Cc (ml) | 180 | |
| Evaporator Capacity (Airflow rate 8.7 kg/min) | Kcal/h | 6,000 ± 10% | |
GENERAL SPECIFICATIONS
Tightening Torque Specifications
| Application | N.m |
|---|---|
| Pressure Transducer | 7 |
| Expansion Valve Retaining Stud Bolts | 8 |
| Liquid Pipe Support Clamp Bolts | 4 |
| Liquid Pipe Block-to-Receiver Dryer Retaining Nut | 14 |
| Liquid Pipe Block-to-Expansion Valve Retaining Nut | 14 |
| Refrigerant Discharge Hose Block-to-Condenser Retaining Nut | 16 |
| Refrigerant Discharge Hose Block-to-Compressor Retaining Nut | 33 |
| Evaporator Core Cover Screws | 1.2 |
| Heater Core Housing-to-Evaporator Housing Retaining Screws | 1.2 |
| Suction Hose Block-to-Compressor Retaining Nut | 33 |
| Suction Hose Support Clamp-to-Longitudinal Member Bolt | 4 |
| Suction Hose Support Clamp-to-Engine Bracket Bolt | 14 |
| Suction Hose Block-to-Expansion Valve Retaining Nut | 14 |
| Band Clamp Bolt (Receiver Dryer) | 5 |
| Receiver Dryer-to-Condenser Pipe Block Bolt | 5 |
| Condenser Mount Bolts | 4 |
| Clutch Plate and Hub Assembly Retaining Nut (Compressor) | 17 |
| Through Bolts (Compressor) | 10 |
| Compressor Mounting Bolts and Nuts | 25 |
| Suction Hose/Liquid Pipe Block-to-Expansion Valve Retaining Nut | 14 |
TIGHTENING TORQUE SPECIFICATIONS