Tightening Torque Specifications
| Fastening part | Tightening torque | ||
|---|---|---|---|
| N.m | Kgf-m | Lb-ft | |
| Tie-rod end lock nut | 45 | 4.5 | 32.5 |
| Stabilizer bar mounting bracket bolt | 23 | 2.3 | 17.0 |
| Stabilizer joint nut | 50 | 5.0 | 36.5 |
| Strut bracket nut | 105 | 10.5 | 76.0 |
| Strut support nut | 28 | 2.8 | 20.5 |
| Brake hose mounting bolt | 25 | 2.5 | 18.0 |
| Wheel nut | 85 | 8.5 | 61.5 |
| Strut nut | 70 | 7.0 | 50.5 |
| Suspension arm ball joint nut | 60 | 6.0 | 43.5 |
| ABS wheel speed sensor mounting bolt | 23 | 2.3 | 17.0 |
| Tie-rod end castle nut | 45 | 4.5 | 32.5 |
| Caliper carrier bolt | 85 | 8.5 | 61.5 |
| Drive shaft nut | 175 | 17.5 | 127.0 |
| Control arm mounting bolt | 90 | 9.0 | 65.0 |
| Suspension frame mounting bolt | 90 | 9.0 | 65.0 |
| Mounting member nut | 55 | 5.5 | 40.0 |
| Engine rear mounting nut | 45 | 4.5 | 33.0 |
TIGHTENING TORQUE SPECIFICATIONS
Note. The specified tightening torque is also described in the following. Front Suspension Construction Front Stabilizer Bar and/or Bushings Components Front Strut Assembly Components Front Wheel Hub and Steering Knuckle Components Front Suspension Frame Components
Reference
For the tightening torque of fastener not specified in this section, refer to FASTENERS INFORMATION .