OPERATION
SI-DRIVE SELECTOR
It is possible to change modes by turning the knob on the console. Turn the knob counterclockwise for S (sport mode), turn clockwise for S# (sport sharp mode) and push the knob for I (intelligent mode). After turning the knob, it will return to its original position.
Scheme 1
Scheme 2
Scheme 3
Scheme 4
- Meter interrupt screen When a mode change is performed, a mode change screen will be displayed for approximately 3 seconds, indicating which mode was selected. When displaying, a buzzer (blip) will sound.
- SI-DRIVE screen By operating the control switch on the steering wheel, it is possible to display the SI-DRIVE screen. The SI-DRIVE screen will display a graph that changes according to the drive mode and accelerator opening.
- Mode display in screens other than SI-DRIVE The driving mode will be displayed on the left side in screens other than SI-DRIVE.
