SPECIAL TOOL
ILLUSTRATION TOOL NUMBER DESCRIPTION REMARKS 899524100 PULLER SET Used for removing the front differential roller bearing. Puller Cap 399780104 WEIGHT Used for adjusting preload on the front differential roller bearing. 498077000 REMOVER Used for removing the roller bearing of the drive pinion shaft. Used for removing the transfer driven gear taper roller bearing. 498077600 CENTER DIFFERENTIAL BEARING REMOVER Used for removing the center differential ball bearing. 498147001 DEPTH GAUGE Used for adjusting the extension end play and main shaft end play. 498247001 MAGNET BASE Used for measuring the backlash of bevel pinion gear and hypoid gear. Used together with DIAL GAUGE (498247100). 498247100 DIAL GAUGE Used for measuring the backlash of bevel pinion gear and hypoid gear. Used together with MAGNET BASE (498247001). 18667AA020 HOLDER Used for removing and installing the drive pinion shaft lock nut. Used for measuring the backlash of hypoid gear. Used for adjusting preload on the front differential roller bearing. 498937000 TRANSMISSION HOLDER Used for removing and installing the main shaft lock nut. 499277100 BUSHING 1-2 INSTALLER Used for installing the drive pinion shaft washer. Used for installing the front differential roller bearing outer race. 499277200 INSTALLER Used for installing the 2nd driven gear bushing, roller bearings, 3rd-4th driven gear, 5th driven gear and the 6th driven gear. Used for installing the drive pinion shaft washer. 927640000 INSTALLER Used for installing the roller bearing (transfer case side) of transfer driven gear. 18630AA010 WRENCH COMPL RETAINER Used for removing and installing the differential side retainer. Used for adjusting preload on the front differential roller bearing. WRENCH COMPL RETAINER (18630AA020) can also be used. 18722AA000 REMOVER Used for removing the 5th drive gear and 6th drive gear. 499877000 RACE 4-5 INSTALLER Used for installing the 4th, 5th and 6th drive gear needle bearing races and the main shaft double taper roller bearings. Used together with REMOVER (899714110). 499917500 DRIVE PINION GAUGE ASSY Used for adjusting the drive pinion shaft shim. 499927100 HANDLE Used for backlash measurement of the hypoid gear and preload adjustment of the front differential roller bearing. 499937100 TRANSMISSION STAND Used for disassembling and assembling the transmission. 499987003 SOCKET WRENCH (35) Used for removing and installing the main shaft lock nut. 499987300 SOCKET WRENCH (50) Used for removing and installing the driven shaft lock nut. 899714110 REMOVER Used for removing and installing the parts of main shaft and driven shaft. 899864100 REMOVER Used for removing the parts of the main shaft. Used for removing the transfer driven gear roller bearing (transfer case side) and for installing it (extension case side). Used for removing the transfer drive gear ball bearing. 18680AA020 HOLDER Used for removing and installing the drive pinion shaft lock nut. Used for removing and installing the driven shaft lock nut. 899904100 STRAIGHT PIN REMOVER Used for removing and installing the straight pin. 398497701 ADAPTER Used for installing the front differential roller bearing. Used together with BUSHING 1-2 INSTALLER (499277100). 498057300 INSTALLER Used for installing the extension case oil seal. 498255400 PLATE Used for measuring the hypoid gear backlash. 398527700 PULLER ASSY Used for removing the extension case oil seal. Used for removing the front differential side retainer bearing outer race. Used for removing the front differential side retainer oil seal. 398643600 GAUGE Used for adjusting the extension end play. 398177700 INSTALLER Used for installing the transfer drive gear ball bearing. Used for installing the 4th drive gear needle bearing race. 498175500 INSTALLER Used for installing the roller bearing of transfer driven gear (extension case side). 28399SA010 OIL SEAL PROTECTOR Used for protecting the oil seal from damage when inserting the front drive shaft. 18675AA000 DIFFERENTIAL SIDE OIL SEAL INSTALLER Used for installing the front differential side retainer oil seal. 398791700 SPRING PIN REMOVER 2 Used for installing and removing the spring pin. 18662AA010 SOCKET (27) Used for removing and installing the drive pinion shaft lock nut. 899754112 PRESS Used for removing driven shaft parts. Used to install the main shaft ball bearing. 18631AA000 HANDLE Used for installing transfer case assembly and extension case assembly. 18762AA000 COMPRESSOR SPECIAL TOOL Used for removing the 1st driven gear. 18654AA000 INSTALLER Used for installing the 2nd driven gear bushing. 18657AA000 INSTALLER Used for installing the transfer case oil seal. 41099AJ130 SPECIAL TOOL FB Used for removing and installing transmission. 99099AJ000 ENGINE HANGER Used for removing and installing transmission. Used together with CHAIN BALANCER (99099AJ010) and sling chain (general tool). 99099AJ010 CHAIN BALANCER Used for removing and installing transmission. (Weight of 350 kg (772 lb) is supported) Used together with ENGINE HANGER (99099AJ000) and sling chain (general tool). Used to hang the engine while balancing it with the sling chain inserted in this tool. 498267200 CYLINDER HEAD TABLE Used for installing and removing the roller bearing of the transfer case. 498267300 CYLINDER HEAD TABLE Used for installing and removing the roller bearing of the transfer case. 18763AA000 COMPRESSOR SHAFT Used for installing and removing the needle bearing of the transfer case. 498277200 STOPPER SET Used for installing the needle bearing of the transfer case. Use only the spacer
