Home ReviewsRefund
Home/Subaru/Outback/Subaru Outback BR (2009-2012)/Repair manual/Reset Procedures/Maintenance Reminder Light Reset Procedures: Overview
Contents Wiring diagrams Section: Reset Procedures All sections

Maintenance Reminder Light Reset Procedures: Overview Subaru Outback BR

Reset Procedures

Display Transmitter ID Operation

Note. In the following procedure, the Subaru Select Monitor must be used.

  1. Connect Subaru Select Monitor.
  2. On "MAIN MENU" display screen, select "EACH SYSTEM CHECK" and press YES/OK key.
  3. On "SYSTEM SELECTION MENU" display screen, select "TIRE PRESSURE MONITORING" and press YES/OK key.
  4. Press YES/OK key after "TIRE PRESSURE MONITORING" is displayed.
  5. On "TIRE PRESSURE MONITOR DIAGNOSIS" display screen, select "TRANSMITTER ID REGIST CONFIRM" and press YES/OK key.
  6. Select "TRANSMITTER ID DATA MONITOR", and press YES/OK key to display transmitter ID.

More articles — Maintenance Reminder Light Reset Procedures