ELECTRICAL SPECIFICATION
| CAUTION | Never remove the occupant detection control module, occupant detection sensor or seat frame because they are integrated into one unit. |
| Terminal name | Terminal No. | Input/Output value | Remarks | |
|---|---|---|---|---|
| IG - power supply | 9 | 9 - 16V | When ignition switch ON | |
| Airbag control module communication | (COM) | 10 | Open collector terminal | Communication line |
| Airbag control module communication | (GND) | 5 | 0 V | Ground |
| Belt tension sensor | (Vcc) | 4 | 0 - 5V | Belt tension sensor power supply |
| (Vout) | 16 | 0.5 - 4.5 V | Sensor output voltage | |
| (GND) | 14 | 0 V | Sensor ground | |
| Occupant detection sensor | (Vcc) | 6 | 0 - 5V | Pressure sensor power supply |
| (Vout) | 7 | 0.5 - 4.5 V | Sensor output voltage | |
| (GND) | 15 | 0 V | Sensor ground | |
| Buckle switch | 1 | 0 - IG voltage | Ignition voltage when switch ON | |
| Buckle switch | (GND) | 2 | 0 V | Switch ground |
ELECTRICAL SPECIFICATION