FUEL SYSTEM SERVICING Subaru Impreza WRX GD/GG рестайлинг

FUEL SYSTEM SERVICING

Note. For additional information on air cleaner case removal and installation, see AIR INTAKE SYSTEM , Engine Mechanical.

Scheme 7

Scheme 8

Scheme 9

Scheme 10

Scheme 11

Scheme 12

Scheme 13

Scheme 14

Scheme 15

Scheme 16

Scheme 17

Scheme 18

Scheme 19

1. Release the fuel pressure, see «RELEASING OF FUEL PRESSURE»(/subaru/impreza-wrx/gdgg-2002-2005/remont/fuel-system/#fuel-system-sohc__releasing-of-fuel-pressure) , FUEL, FUEL SYSTEM SERVICING.
2. Open the fuel flap lid, and remove the fuel filler cap.
3. Disconnect the ground cable from battery.
4. Remove the resonator chamber, see «REMOVAL»(/subaru/impreza-wrx/gdgg-2002-2005/remont/mechanical/#air-intake-system-h4so) , Resonator Chamber.
5. Remove the spark plug cords from the spark plugs (#1 and #3 cylinders).
6. Remove the power steering pump and tank from the brackets. Remove the front side V-belt, see «REMOVAL»(/subaru/impreza-wrx/gdgg-2002-2005/remont/mechanical/#engine-mecahnical-25l-sohc) , V-belt. Remove the bolts which hold the power steering pipes onto the intake manifold protector. Remove the bolts which install the power steering pump to the bracket. Disconnect the connector from the power steering pump switch. Remove the reservoir tank from the bracket by pulling it upwards. Place the power steering pump and tank on the right side wheel apron.
7. Remove the fuel pipe protector RH.
8. Disconnect the connectors from the fuel injectors.
9. Remove the bolts which holds the injector pipe to the intake manifold.
10. Remove the fuel injector from the intake manifold. Remove the fuel injector securing clip. Remove the fuel injector while lifting up the fuel injector pipe.

Scheme 20

Scheme 21

Scheme 22

Scheme 23

Scheme 24

Scheme 25

Scheme 26

Scheme 27

Scheme 28

Scheme 29

Scheme 30

Scheme 31

1. Release the fuel pressure, see «RELEASING OF FUEL PRESSURE»(/subaru/impreza-wrx/gdgg-2002-2005/remont/fuel-system/#fuel-system-sohc__releasing-of-fuel-pressure) , FUEL, FUEL SYSTEM SERVICING.
2. Open the fuel flap lid, and remove the fuel filler cap.
3. Disconnect the ground cable from battery.
4. Remove the two bolts which install the washer tank on the body.
5. Disconnect the connector from the front window washer motor.
6. Disconnect the connector from the rear gate glass washer motor.
7. Disconnect the rear window glass washer hose from the washer motor, then plug the connection with a suitable cap.
8. Move the washer tank, and secure it away from the working area.
9. Remove the spark plug cords from the spark plugs (#2 and #4 cylinders).
10. Remove the fuel pipe protector LH.
11. Disconnect the connectors from the fuel injectors.
12. Remove the bolts which holds the injector pipe to the intake manifold.
13. Remove the bolt which holds the fuel pipe on the left side intake manifold.
14. Remove the fuel injector from the intake manifold. Remove the fuel injector securing clip. Remove the fuel injector while lifting up the fuel injector pipe.