Home ReviewsRefund
Home/Subaru/Impreza WRX/Subaru Impreza WRX GD/GG рестайлинг (2002-2005)/Repair manual/Engine Lubrication Sysyem/DISASSEMBLY
Contents Section: Engine Lubrication Sysyem All sections

DISASSEMBLY Subaru Impreza WRX GD/GG рестайлинг

Engine Lubrication Sysyem 3 illustrations ~119 words

DISASSEMBLY

Remove the screws which secure oil pump cover and disassemble oil pump. Inscribe alignment marks on the inner and outer rotors so that they can be replaced in their original positions during reassembly.

CAUTIONBefore disassembling the oil pump, remove the relief valve.

Scheme 26

Scheme 26
Scheme 26

Scheme 27

Scheme 27: ASSEMBLY
Scheme 27: ASSEMBLY

Scheme 28

Scheme 28
Scheme 28
  1. Install the front oil seal by using ST. ST 499587100 OIL SEAL INSTALLER NOTE: Use a new oil seal.
  2. Apply a coat of engine oil to the inner and outer rotors.
  3. Install the inner and outer rotors in their original positions.
  4. Install the oil relief valve and relief valve spring and plug. NOTE: Use a new gasket.
  5. Install the oil pump cover. Tightening torque: T1: 5 N.m (0.5 kgf.m, 3.6 ft.lb) T2: 44 N.m (4.5 kgf.m, 32.5 ft.lb)