Disassembly
| CAUTION | Be careful not to allow foreign particles to enter inlet at brake hose connector. |
- Clean mud and foreign particles from the caliper body assembly and support.
- Gradually supply compressed air via caliper body brake hose to force piston out. (Scheme 52) CAUTION: Place a wooden block as shown to prevent damage to piston. Do not apply excessively high pressure.
- Remove piston boot. (Scheme 53)
- Remove piston seal from caliper body cylinder. (Scheme 54)
- Remove guide pin and boot from the caliper body. NOTE: Repair or replace faulty parts.
- Check caliper body and piston for uneven wear, damage or rust.
- Check the rubber parts for damage or deterioration.
