Home ReviewsRefund
Home/Subaru/Impreza WRX/Subaru Impreza WRX GD/GG рестайлинг (2002-2005)/Repair manual/Automatic Transmission (diagnostics)/CLEAR MEMORY MODE
Contents Section: Automatic Transmission (diagnostics) All sections

CLEAR MEMORY MODE Subaru Impreza WRX GD/GG рестайлинг

Automatic Transmission (diagnostics) 2 illustrations ~146 words

CLEAR MEMORY MODE

  1. On the << Main Menu >> display screen, select the {2. Each System Check} and press the [YES] key.
  2. On the << System Selection Menu >> display screen, select the {Transmission Control System} and press the [YES] key.
  3. Press the [YES] key after displayed the information of transmission type.
  4. On the << Transmission Diagnosis >> display screen, select the {Clear Memory} and press the [YES] key.
  5. When the Done and Turn Ignition Switch OFF' are shown on the display screen, turn the Subaru Select Monitor and ignition switch to OFF. NOTE: For detailed operation procedure, refer to the SUBARU SELECT MONITOR OPERATION MANUAL.

Scheme 595

Scheme 595: WITHOUT SUBARU SELECT MONITOR
Scheme 595: WITHOUT SUBARU SELECT MONITOR

The AT OIL TEMP warning light flashes the code corresponding to the faulty part.

The long segment (1.2 seconds on) indicates a "ten", and the short segment (0.2 seconds on) signifies a "one".

Scheme 596

Scheme 596
Scheme 596