Service Intervals
| Component | Interval (Miles) |
|---|
| Air Filter | (1) 30,000 |
| Automatic Transmission Fluid | (2) (12) 30,000 |
| Brake Fluid | (3) 30,000 |
| Brake Shoe Linings & Drums | (4) 30,000 |
| Camshaft Timing Belt |
| 2.0L & 2.5L | 30,000 |
| 3.0L | (5) |
| Clutch | (6) 15,000 |
| Coolant (Radiator) | 30,000 |
| Disc Brake Pads & Discs, Front & Rear Axle Boots & Shaft Joint Portions | (4) 15,000 |
| Drive Belt(s) | (6) 30,000 |
| Front & Rear Wheel Bearing Lubrication | (6) 60,000 |
| Fuel Filter | (4) (7) (11) 30,000 |
| Inspect Brake Lines & Check Operation Of Parking & Service Brake System | (6) 15,000 |
| Oil & Filter | (8) 7,500 |
| Rotate & Inspect Tires | (9) 7,500 |
| Spark Plugs |
| 2.0L & 2.5L | 30,000 |
| 3.0L | 60,000 |
| Steering & Suspension | (4) 15,000 |
| Supplemental Restraint System | (6) Every 10 Years |
| Transmission & Differential (Front & Rear) Fluid | (2) 30,000 |
| Valve Clearance | (10) |
| (1) When the vehicle is used in extremely dusty conditions, the air cleaner element should be replaced more often. (2) When the vehicle is frequently operated under severe driving conditions, replacement should be performed every 15,000 miles (24,000 km). (3) When the vehicle is used in high humidity or mountainous areas, change the brake fluid every 15,000 miles (24,000 km) or 15 months, whichever occurs first. (4) When the vehicle is used under severe driving conditions, inspection should be performed every 7,500 miles (12,000 km) or 7 1/2 months, whichever occurs first. (5) Periodic inspection and replacement of the camshaft drive chains on the 3.0L models is not required. (6) Inspect. (7) When the vehicle is used in extremely cold or hot weather areas, contamination of the filter may occur and filter replacement should be performed more often. (8) When the vehicle is used under severe driving conditions, the engine oil and filter should be changed every 3,750 miles (6,000 km) or three months. (9) A tire should be replaced when the tread wear indicator appears as a solid band across the tread; this occurs when the remaining tread has worn to 0.063 inches (1.6 mm) or less. (10) N/A. (11) This inspection is not required to maintain emission warranty eligibility and it does not affect the manufacturers obligations under EPAs in use compliance program. (12) The ATF filter is a maintenance free part. The ATF filter needs replacement only when it has physical damage or if the ATF has leaked. |
| (1) | When the vehicle is used in extremely dusty conditions, the air cleaner element should be replaced more often. |
| (2) | When the vehicle is frequently operated under severe driving conditions, replacement should be performed every 15,000 miles (24,000 km). |
| (3) | When the vehicle is used in high humidity or mountainous areas, change the brake fluid every 15,000 miles (24,000 km) or 15 months, whichever occurs first. |
| (4) | When the vehicle is used under severe driving conditions, inspection should be performed every 7,500 miles (12,000 km) or 7 1/2 months, whichever occurs first. |
| (5) | Periodic inspection and replacement of the camshaft drive chains on the 3.0L models is not required. |
| (7) | When the vehicle is used in extremely cold or hot weather areas, contamination of the filter may occur and filter replacement should be performed more often. |
| (8) | When the vehicle is used under severe driving conditions, the engine oil and filter should be changed every 3,750 miles (6,000 km) or three months. |
| (9) | A tire should be replaced when the tread wear indicator appears as a solid band across the tread; this occurs when the remaining tread has worn to 0.063 inches (1.6 mm) or less. |
| (11) | This inspection is not required to maintain emission warranty eligibility and it does not affect the manufacturers obligations under EPAs in use compliance program. |
| (12) | The ATF filter is a maintenance free part. The ATF filter needs replacement only when it has physical damage or if the ATF has leaked. |
INSPECTION & REPLACEMENT INTERVALS
