Home ReviewsRefund
Home/Subaru/Forester/Subaru Forester SG (2002-2005)/Repair manual/Communication Devices/Communication System: Other
Contents Wiring diagrams Section: Communication Devices All sections

Communication System: Other Subaru Forester SG

Communication Devices 4 illustrations ~156 words

CAUTION

  1. Before disassembling or reassembling parts, always disconnect the battery ground cable. When replacing radio, control module, and other parts provided with memory functions, record memory contents before disconnecting the battery ground cable. Otherwise, the memory will be erased.
  2. Reassemble in reverse order of disassembly, unless otherwise indicated.
  3. Adjust parts to the given specifications.
  4. Connect the connectors and hoses securely during reassembly.
  5. After reassembly, make sure functional parts operate smoothly.

Scheme 5

Scheme 5: GENERAL TOOLS
Scheme 5: GENERAL TOOLS

HORN

Refer to SCHEMATIC , Horn System.

HORN RELAY

Measure the horn relay resistance between terminals (indicated in table below) when connecting terminal No. 4 to battery positive terminal and terminal No. 3 to battery negative terminal.

Scheme 6

Scheme 6: HORN RELAY
Scheme 6: HORN RELAY

Scheme 7

Scheme 7
Scheme 7

Scheme 8

Scheme 8: REMOVAL
Scheme 8: REMOVAL
  1. Disconnect the ground cable from battery.
  2. Remove the front fog light assembly (LH). Refer to «REMOVAL»(ref-200804-S10531809872005102300000) , Front Fog Light Assembly.
  3. Remove the horn bracket mounting bolt (A).
  4. Disconnect the harness connector and remove the horn assembly (B).

More articles — Communication System