CAUTION

CAUTION Subaru Baja I

Supplemental Restraint System "Airbag" The airbag system wiring harness is routed near the transmission control module (TCM).

CAUTION

All airbag system wiring harness and connectors are colored yellow. Do not use an electrical test equipment on these circuit. Be careful not to damage the airbag system wiring harness when performing diagnostics and servicing the TCM. Measurement When measuring the voltage and resistance of ECM, TCM or each sensor, use a tapered pin with diameter of less than 0.64 mm (0.025 in) in order to avoid poor contact. Do not insert the pin more than 0.65 mm (0.256 in).

Scheme 619

Scheme 619: INSPECTION

Scheme 620

Scheme 621

Scheme 622

Scheme 623

BATTERY Measure the battery voltage and specific gravity of electrolyte. Standard voltage: 12 V or more Specific gravity: Above 1.260
TRANSMISSION GROUND Make sure that the ground terminal bolt is tightened securely. Chassis side Tightening torque: 13 N.m (1.3 kgf-m, 9.4 ft-lb)
ATF LEVEL Make sure that ATF level is in the specification. Refer to «INSPECTION»(ref-208395-S08573280712005120700000) , Automatic Transmission Fluid.
FRONT DIFFERENTIAL OIL LEVEL Make sure that the front differential oil level is in specification. Refer to «INSPECTION»(ref-208395-S35747931822005120700000) , Differential Gear Oil.
OPERATION OF SHIFT SELECT LEVER Make sure there is no abnormal noise, dragging or contact pattern in each select lever range. WARNING: Stop the engine while checking operation of selector lever. Without SPORT shift With SPORT shift