SPECIFIED TORQUE FOR STANDARD BOLTS
| Class | Diameter (mm) | Pitch (mm) | Specified torque | |||||
|---|---|---|---|---|---|---|---|---|
| Hexagon head bolt | Hexagon flange bolt | |||||||
| N*m | Kgf*cm | Ft.*lbf | N*m | Kgf*cm | Ft.*lbf | |||
| 4T | 6 | 1 | 5 | 55 | 48 in.*lbf | 6 | 60 | 52 in.*lbf |
| 8 | 1.25 | 12.5 | 130 | 9 | 14 | 145 | 10 | |
| 10 | 1.25 | 26 | 260 | 19 | 29 | 290 | 21 | |
| 12 | 1.25 | 47 | 480 | 35 | 53 | 540 | 39 | |
| 14 | 1.5 | 74 | 760 | 55 | 84 | 850 | 61 | |
| 16 | 1.5 | 115 | 1,150 | 83 | ||||
| 5T | 6 | 1 | 6.5 | 65 | 56 in.*lbf | 7.5 | 75 | 65 in.*lbf |
| 8 | 1.25 | 15.5 | 160 | 12 | 17.5 | 175 | 13 | |
| 10 | 1.25 | 32 | 330 | 24 | 36 | 360 | 26 | |
| 12 | 1.25 | 59 | 600 | 43 | 65 | 670 | 48 | |
| 14 | 1.5 | 91 | 930 | 67 | 100 | 1,050 | 76 | |
| 16 | 1.5 | 140 | 1,400 | 101 | ||||
| 6T | 6 | 1 | 8 | 80 | 69 in.*lbf | 9 | 90 | 78 in.*lbf |
| 8 | 1.25 | 19 | 195 | 14 | 21 | 210 | 15 | |
| 10 | 1.25 | 39 | 400 | 29 | 44 | 440 | 32 | |
| 12 | 1.25 | 71 | 730 | 53 | 80 | 810 | 59 | |
| 14 | 1.5 | 110 | 1,100 | 80 | 125 | 1,250 | 90 | |
| 16 | 1.5 | 170 | 1,750 | 127 | ||||
| 7T | 6 | 1 | 10.5 | 110 | 8 | 12 | 120 | 9 |
| 8 | 1.25 | 25 | 260 | 19 | 28 | 290 | 21 | |
| 10 | 1.25 | 52 | 530 | 38 | 58 | 590 | 43 | |
| 12 | 1.25 | 95 | 970 | 70 | 105 | 1,050 | 76 | |
| 14 | 1.5 | 145 | 1,500 | 108 | 165 | 1,700 | 123 | |
| 16 | 1.5 | 230 | 2,300 | 166 | ||||
| 8T | 8 | 1.25 | 29 | 300 | 22 | 33 | 330 | 24 |
| 10 | 1.25 | 61 | 620 | 45 | 68 | 690 | 50 | |
| 12 | 1.25 | 110 | 1,100 | 80 | 120 | 1,250 | 90 | |
| 9T | 8 | 1.25 | 34 | 340 | 25 | 37 | 380 | 27 |
| 10 | 1.25 | 70 | 710 | 51 | 78 | 790 | 57 | |
| 12 | 1.25 | 125 | 1,300 | 94 | 140 | 1,450 | 105 | |
| 10T | 8 | 1.25 | 38 | 390 | 28 | 42 | 430 | 31 |
| 10 | 1.25 | 78 | 800 | 58 | 88 | 890 | 64 | |
| 12 | 1.25 | 140 | 1,450 | 105 | 155 | 1,600 | 116 | |
| 11T | 8 | 1.25 | 42 | 430 | 31 | 47 | 480 | 35 |
| 10 | 1.25 | 87 | 890 | 64 | 97 | 990 | 72 | |
| 12 | 1.25 | 155 | 1,600 | 116 | 175 | 1,800 | 130 | |
SPECIFIED TORQUE FOR STANDARD BOLTS
Scheme 1
HINT
- *: Nut with 1 or more marks on one side surface of the nut.
- Use a nut with the same nut strength classification number (or greater) as the bolt strength classification number when tightening parts with a bolt and nut.
Example
- Bolt = 4T
- Nut = 4N or more
TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf | |
|---|---|---|---|---|
| Air fuel ratio sensor x Exhaust manifold converter | Without SST | 44 | 449 | 32 |
| With SST | 40 | 408 | 30 | |
| Heated oxygen sensor x Front exhaust pipe assembly | Without SST | 44 | 449 | 32 |
| With SST | 40 | 408 | 30 | |
| Camshaft timing oil control valve assembly x Cylinder head assembly | 8.5 | 87 | 75 in.*lbf | |
| No. 1 engine cover sub-assembly x Cylinder head cover sub-assembly | 9.0 | 92 | 80 | |
| Camshaft position sensor x Cylinder head assembly | 8.0 | 82 | 71 in.*lbf | |
| Outer cowl top panel x Body | 6.0 | 61 | 53 in.*lbf | |
| Cowl body mounting reinforcement LH x Outer cowl top panel x Body | 6.0 | 61 | 53 in.*lbf | |
| Crankshaft position sensor x Timing chain or belt cover sub-assembly | 9.0 | 90 | 80 in.*lbf | |
| Engine coolant temperature sensor x Cylinder head assembly | 20 | 204 | 15 | |
| Throttle with motor body assembly x Intake manifold | 30 | 306 | 22 | |
| Knock sensor x Cylinder block assembly | 20 | 204 | 15 | |
| Intake manifold x Cylinder block assembly | 30 | 306 | 22 | |
| ECM x Body | 8.0 | 82 | 71 | |
| Accelerator pedal assembly x Body | 5.4 | 55 | 48 | |
| Generator assembly x Cylinder block assembly | Bolt A | 21 | 215 | 16 |
| Bolt B | 52 | 530 | 38 | |
| Terminal B x Generator assembly | 9.8 | 100 | 87 in.*lbf | |
| Air cleaner case sub-assembly x Body | 7.0 | 71 | 62 in.*lbf | |
| Front wiper arm and blade assembly LH x Front wiper motor and link | 26 | 265 | 19 | |
| Front wiper arm and blade assembly RH x Front wiper motor and link | 26 | 265 | 19 | |
| Front wiper motor and link x Outer cowl top panel | 5.5 | 56 | 49 in.*lbf | |
| Fuel delivery pipe sub-assembly x Cylinder head assembly | 20 | 204 | 15 | |
| No. 1 exhaust manifold heat insulator x Exhaust manifold converter | 12 | 122 | 9 | |
2AZ-FE ENGINE CONTROL SYSTEM - TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf | |
|---|---|---|---|---|
| Camshaft timing gear assembly x Camshaft | 54 | 551 | 40 | |
| Camshaft x Cylinder head | No. 1 | 30 | 301 | 22 |
| Other | 9.0 | 92 | 80 in.*lbf | |
| No. 2 camshaft x Cylinder head | No. 2 | 30 | 301 | 22 |
| Other | 9.0 | 92 | 80 in.*lbf | |
| Camshaft timing gear or sprocket No. 2 camshaft | 54 | 551 | 40 | |
| No. 1 chain tensioner assembly x Timing chain or belt cover sub-assembly | 9.0 | 92 | 80 in.*lbf | |
| Cylinder head cover sub-assembly x Cylinder head sub-assembly | Bolt A | 11 | 112 | 8 |
| Bolt B | 14 | 143 | 10 | |
| Nut | 11 | 112 | 8 | |
| Cylinder head sub-assembly x Cylinder block | 1st | 70 | 714 | 52 |
| 2nd | Turn 90° | Turn 90° | Turn 90° | |
| Ground cable x Cylinder head sub-assembly | 8.4 | 86 | 74 in.*lbf | |
| Chain tensioner plate x Cylinder block | 12 | 122 | 9 | |
| Oil pump drive shaft sprocket x Oil pump | 30 | 301 | 22 | |
| No. 1 chain vibration damper x Cylinder head sub-assembly | 9.0 | 92 | 80 in.*lbf | |
| No. 1 chain vibration damper x Cylinder block | 9.0 | 92 | 80 in.*lbf | |
| Chain tensioner slipper x Cylinder block | 19 | 194 | 14 | |
| Timing chain guide x Cylinder block | 9.0 | 92 | 80 in.*lbf | |
| Timing chain or belt cover sub-assembly x Cylinder head sub-assembly or Cylinder block | Bolt A | 9.0 | 92 | 80 in.*lbf |
| Bolt B | 25 | 255 | 18 | |
| Bolt C | 55 | 561 | 41 | |
| Nut | 11 | 112 | 8 | |
| Stud bolt x Timing chain or belt cover sub-assembly | 22 | 219 | 16 | |
| V-ribbed belt tensioner assembly x Timing chain or belt cover sub-assembly | 60 | 607 | 44 | |
| Transverse engine mounting bracket x Timing chain or belt cover sub-assembly | 55 | 561 | 41 | |
| Crankshaft pulley x Crankshaft | 180 | 1835 | 133 | |
| Oil pan sub-assembly x Stiffening crankcase assembly or Timing chain or belt cover sub-assembly | 9.0 | 92 | 80 in.*lbf | |
| Idler pulley sub-assembly x Cylinder block sub-assembly | 50 | 510 | 37 | |
| Engine mounting insulator sub-assembly RH x Transverse engine mounting bracket | Bolt | 95 | 969 | 70 |
| Nut A | 95 | 969 | 70 | |
| Nut B | 52 | 530 | 38 | |
| Cooler bracket x Engine mounting insulator sub-assembly RH | 9.8 | 100 | 87 in.*lbf | |
| Front engine mounting insulator sub-assembly x Front cross member sub-assembly | Through bolt | 145 | 1479 | 107 |
| Nut | 145 | 1479 | 107 | |
| Bolt | 95 | 969 | 70 | |
| Exhaust manifold converter sub-assembly x Cylinder head sub-assembly | 37 | 377 | 27 | |
| No. 1 exhaust manifold heat insulator x Exhaust manifold converter sub-assembly | 12 | 122 | 9 | |
| No. 2 manifold stay x Exhaust manifold converter sub-assembly | 44 | 449 | 32 | |
| Manifold stay x Exhaust manifold converter sub-assembly | 44 | 449 | 32 | |
| Oil dipstick guide x Cylinder block | 9.0 | 92 | 80 in.*lbf | |
| Radiator reserve tank assembly x Body | 5.0 | 51 | 44 in.*lbf | |
| Stud bolt x Cylinder head sub-assembly | Bolt A | 5.0 | 51 | 44 in.*lbf |
| Bolt B | 5.0 | 51 | 44 in.*lbf | |
| Bolt C | 9.5 | 97 | 84 in.*lbf | |
| Bolt D | 9.5 | 97 | 84 in.*lbf | |
| No. 1 straight head screw plug x Cylinder head sub-assembly | 86 | 877 | 64 | |
| Stud bolt x Cylinder block | 9.5 | 97 | 84 in.*lbf | |
| No. 1 oil nozzle sub-assembly x Cylinder block | 7.0 | 71 | 62 in.*lbf | |
| Crankshaft bearing cap x Cylinder block | 1st | 40 | 408 | 30 |
| 2nd | Turn 90° | Turn 90° | Turn 90° | |
| Connecting rod cap x Connecting rod | 1st | 25 | 250 | 18 |
| 2nd | Turn 90° | Turn 90° | Turn 90° | |
| For Automatic Transaxle: Drive plate and ring sub-assembly x Crankshaft | 98 | 999 | 72 | |
| For Manual Transaxle: Flywheel sub-assembly x Crankshaft | 130 | 1326 | 96 | |
| No. 1 engine hanger x Cylinder head sub-assembly | 38 | 387 | 28 | |
| No. 2 engine hanger x Cylinder head sub-assembly | 38 | 387 | 28 | |
| Drive shaft bearing bracket x Cylinder block | 64 | 653 | 47 | |
| Drive shaft bearing bracket x Stiffening crankcase assembly | 64 | 653 | 47 | |
| Rear engine mounting insulator sub-assembly x Transaxle | 95 | 969 | 70 | |
| Engine mounting insulator sub-assembly LH x Frame | 95 | 969 | 70 | |
| Engine mounting insulator sub-assembly LH x Transaxle | 56 | 571 | 41 | |
| Front cross member sub-assembly x Frame | 96 | 979 | 71 | |
| Front suspension crossmember sub-assembly x Frame | Bolt A | 145 | 1479 | 107 |
| Bolt B | 95 | 969 | 70 | |
| Nut | 95 | 969 | 70 | |
| Front suspension member brace rear x Frame | 93 | 948 | 69 | |
| Front suspension member brace rear x Front suspension crossmember sub-assembly | 145 | 1479 | 107 | |
| Front suspension member reinforcement x Front cross member sub-assembly | 96 | 979 | 71 | |
| Front suspension member reinforcement x Front suspension crossmember sub-assembly | 96 | 979 | 71 | |
| Engine wire x Positive battery terminal | 13 | 133 | 10 | |
| Front exhaust pipe assembly x Exhaust manifold converter | 43 | 438 | 32 | |
| Center exhaust pipe assembly x Front exhaust pipe assembly | 43 | 438 | 32 | |
| Stiffening crankcase assembly x Cylinder block | 24 | 245 | 18 | |
| No. 1 taper head screw plug x Cylinder block | 26 | 265 | 19 | |
| Oil control valve filter x Cylinder head sub-assembly | 30 | 306 | 22 | |
| Inlet water housing x Cylinder block | 35 | 357 | 26 | |
| Stud bolt x Inlet water housing | 5.0 | 51 | 44 in.*lbf | |
| Inlet water housing drain cock assembly x Inlet water housing | 25 | 255 | 18 | |
| Plug x Inlet water housing drain cock | 13 | 133 | 10 | |
| Camshaft timing oil control valve assembly x Cylinder head sub-assembly | 9.0 | 92 | 80 in.*lbf | |
| Crankshaft position sensor x Timing chain or belt cover sub-assembly | 9.0 | 92 | 80 in.*lbf | |
| Oil pan drain plug x Oil pan sub-assembly | 25 | 250 | 18 | |
| Camshaft position sensor x Cylinder head sub-assembly | 9.0 | 92 | 80 in.*lbf | |
| Oil filter union x Stiffening crankcase assembly | 30 | 306 | 22 | |
| Ventilation valve sub-assembly x Cylinder head cover sub-assembly | 19 | 194 | 14 | |
| Radio setting condenser x Cylinder head sub-assembly | 10 | 102 | 7 | |
| No. 1 water by-pass pipe x Inlet water housing | 9.0 | 92 | 80 in.*lbf | |
| No. 1 water by-pass pipe x Cylinder block | 9.0 | 92 | 80 in.*lbf | |
| Intake manifold x Cylinder head sub-assembly | 30 | 306 | 22 | |
| Intake manifold x Cylinder block | 30 | 306 | 22 | |
| Front wheel | 103 | 1050 | 76 | |
2AZ-FE ENGINE MECHANICAL - TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Fuel delivery pipe sub-assembly x Cylinder head sub-assembly | 20 | 204 | 15 |
| Fuel pressure pulsation damper assembly x Fuel delivery pipe sub-assembly | 9.0 | 90 | 80 in.*lbf |
| Fuel tank vent tube set plate x Fuel tank | 4.0 | 41 | 35 in.*lbf |
| No. 1 engine cover sub-assembly x Cylinder head cover sub-assembly | 9.0 | 92 | 80 in.*lbf |
| Fuel tank x Body | 39 | 400 | 29 |
| Rear seat cushion reg sub-assembly x Body | 42 | 428 | 31 |
| No. 1 fuel tank protector sub-assembly x Body | 5.5 | 56 | 49 in.*lbf |
| Parking brake cable assembly x Body | 6.0 | 61 | 53 in.*lbf |
| No. 2 center exhaust pipe assembly x Center exhaust pipe assembly | 43 | 438 | 32 |
| No. 2 center exhaust pipe assembly x Tail exhaust pipe assembly | 43 | 438 | 32 |
| Rear floor side member brace sub-assembly x Body | 54 | 551 | 40 |
| Rear floor side member cover LH x Body | 5.4 | 55 | 48 in.*lbf |
| Rear floor side member cover RH x Body | 5.4 | 55 | 48 in.*lbf |
2AZ-FE FUEL - TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf | |
|---|---|---|---|---|
| Canister x Floor assembly | 19 | 194 | 14 | |
| PCV valve x Cylinder head cover sub-assembly | 19 | 194 | 14 | |
| Exhaust manifold converter x Cylinder head assembly | 37 | 377 | 27 | |
| No. 1 engine under cover x Body | 8.8 | 90 | 78 | |
| Front exhaust pipe assembly x Exhaust manifold converter | 43 | 438 | 32 | |
| No. 1 exhaust manifold insulator x Exhaust manifold converter | 12 | 122 | 9 | |
| Air fuel ratio sensor x Exhaust manifold converter | Without SST | 44 | 449 | 32 |
| With SST | 40 | 408 | 30 | |
| No. 2 manifold stay x Exhaust manifold converter | 44 | 449 | 33 | |
| Manifold stay x Exhaust manifold converter | 44 | 449 | 33 | |
| No. 1 exhaust manifold converter heat insulator x Exhaust manifold converter | 12 | 122 | 9 | |
| No. 2 exhaust manifold heat insulator x Exhaust manifold converter | 12 | 122 | 9 | |
| No. 1 engine cover sub-assembly x Cylinder head assembly | 9.0 | 92 | 80 | |
2AZ-FE EMISSION CONTROL - TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf | |
|---|---|---|---|---|
| Air cleaner case sub-assembly x Air cleaner bracket | 7.0 | 71 | 62 in.*lbf | |
| No. 1 cylinder head cover sub-assembly x Cylinder head cover assembly | 7.0 | 71 | 62 | |
| Throttle body assembly x Intake manifold | 30 | 306 | 22 | |
| Intake manifold x Cylinder head sub-assembly | Bolt | 30 | 306 | 22 |
| Nut | 30 | 306 | 22 | |
| Front wiper arm and blade assembly RH x Front wiper motor and link | 26 | 265 | 19 | |
| Front wiper arm and blade assembly LH x Front wiper motor and link | 26 | 265 | 19 | |
| Front wiper motor and link x Outer cowl top panel | 5.5 | 56 | 49 in.*lbf | |
| Cowl body reinforcement LH x Outer cowl top panel | 6.0 | 61 | 53 in.*lbf | |
| Outer cowl top panel x Body | 6.0 | 61 | 53 in.*lbf | |
| Fuel delivery pipe sub-assembly x Cylinder head sub-assembly | 20 | 204 | 15 | |
| Vacuum hose clamp x Intake manifold | 8.5 | 87 | 75 in.*lbf | |
2AZ-FE INTAKE - TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Exhaust front pipe assembly x Exhaust manifold | 43 | 438 | 32 |
| Heated oxygen sensor x Front exhaust pipe assembly | 44 | 449 | 32 |
| No. 1 engine under cover x Body | 8.8 | 90 | 78 in.*lbf |
| Front floor center brace x Body | 51 | 520 | 38 |
| Center exhaust pipe assembly x Front exhaust pipe assembly | 43 | 438 | 32 |
| No. 2 center exhaust pipe assembly x Center exhaust pipe assembly | 43 | 438 | 32 |
| Tail exhaust pipe assembly x No. 2 center exhaust pipe assembly | 43 | 438 | 32 |
2AZ-FE EXHAUST - TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf | |
|---|---|---|---|---|
| Cylinder block drain cock plug x Cylinder block | 13 | 130 | 9 | |
| Water pump assembly x Inlet water housing | 9.0 | 92 | 80 in.*lbf | |
| Water pump pulley x Water pump assembly | 26 | 265 | 19 | |
| Inlet water x Cylinder block | 9.0 | 92 | 80 in.*lbf | |
| Fan shroud x Radiator assembly | 7.0 | 71 | 62 in.*lbf | |
| No. 2 fan shroud x Radiator assembly | 7.0 | 71 | 62 in.*lbf | |
| Hood lock support sub-assembly x Body | 13 | 127 | 9 | |
| No. 1 water hose clamp bracket x Hood lock support sub-assembly | 5.0 | 51 | 44 in.*lbf | |
| Battery carrier | Bolt | 17 | 168 | 12 |
| Nut | 3.5 | 35 | 31 in.*lbf | |
| Battery negative terminal | 5.4 | 55 | 48 in.*lbf | |
| Battery positive terminal | 5.4 | 55 | 48 in.*lbf | |
2AZ-FE COOLING - TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Oil pan drain plug x Oil pan sub-assembly | 25 | 250 | 18 |
| Oil filter sub-assembly x Oil filter union | 13 | 130 | 10 |
| Oil pressure switch x Cylinder head sub-assembly | 15 | 153 | 11 |
| Oil pump cover x Oil pump body | 8.8 | 90 | 78 in.*lbf |
| Oil pump relief valve x Oil pump body | 49 | 500 | 36 |
| Oil pump strainer x Oil pump cover | 8.8 | 90 | 78 in.*lbf |
| Oil pump assembly x Cylinder block | 19 | 194 | 14 |
2AZ-FE LUBRICATION - TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Spark plug x Cylinder head sub-assembly | 19 | 194 | 14 |
| Ignition coil assembly x Cylinder head cover sub-assembly | 9.0 | 92 | 80 in.*lbf |
| No. 1 engine cover sub-assembly x Cylinder head cover sub-assembly | 9.0 | 92 | 80 in.*lbf |
2AZ-FE IGNITION - TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf | |
|---|---|---|---|---|
| Starter assembly (for Manual Transaxle) x Transaxle | Bolt A | 37 | 377 | 27 |
| Bolt B | 12 | 120 | 9 | |
| Terminal 30 | 9.8 | 100 | 87 in.*lbf | |
| Starter assembly (for Automatic Transaxle) x Transaxle | Bolt | 37 | 377 | 27 |
| Terminal 30 | 9.8 | 100 | 87 in.*lbf | |
| Air cleaner case sub-assembly x Air cleaner bracket | 7.0 | 71 | 62 in.*lbf | |
| Negative battery terminal x Battery | 5.4 | 55 | 47 in.*lbf | |
| Starter yoke assembly x Starter commutator end frame assembly | 6.0 | 61 | 53 in.*lbf | |
| Magnet switch body x Motor terminal starter kit | 7.5 | 76 | 66 in.*lbf | |
| Terminal C x Magnet switch body | 10 | 102 | 7 | |
2AZ-FE STARTING - TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf | |
|---|---|---|---|---|
| Wire harness clamp bracket x Generator assembly | 8.4 | 86 | 74 in.*lbf | |
| Generator assembly x Cylinder block | Bolt A | 21 | 215 | 16 |
| Bolt B | 52 | 530 | 38 | |
| Generator wire x Terminal B | 9.8 | 100 | 87 in.*lbf | |
| Negative battery terminal x Battery | 5.4 | 55 | 47 in.*lbf | |
| Generator drive end frame x Bearing retainer plate | 2.3 | 23 | 20 in.*lbf | |
| Generator coil assembly x Generator drive end frame | 5.8 | 59 | 51 in.*lbf | |
| Cord clip x Generator coil assembly | 4.6 | 47 | 41 in.*lbf | |
| Generator brush holder assembly x Generator coil assembly | 1.8 | 18 | 16 in.*lbf | |
| Generator rear end cover x Generator coil assembly | 4.6 | 47 | 41 in.*lbf | |
| Generator clutch pulley x Generator rotor assembly | 111 | 1127 | 82 | |
2AZ-FE CHARGING - TORQUE SPECIFICATIONS
SPEED SENSOR
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Speed sensor NT x Automatic transaxle | 11 | 110 | 8 |
| Speed sensor NC x Automatic transaxle | 8.8 | 90 | 78 in.*lbf |
SPEED SENSOR - TORQUE SPECIFICATIONS
PARK / NEUTRAL POSITION SWITCH
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Park/neutral position switch assembly x Automatic transaxle | 5.4 | 55 | 48 in.*lbf |
| Manual valve shaft nut | 6.9 | 70 | 61 in.*lbf |
| Control shaft lever x Park/neutral position switch assembly | 13 | 133 | 10 |
| Transmission control cable assembly x Control shaft lever | 15 | 153 | 11 |
PARK / NEUTRAL POSITION SWITCH - TORQUE SPECIFICATIONS
TRANSMISSION WIRE
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Drain plug | 49 | 500 | 36 |
| Transmission wire x Automatic transaxle case | 5.4 | 55 | 48 in.*lbf |
| ATF temperature sensor x Lock plate | 6.6 | 67 | 58 in.*lbf |
| Automatic transaxle oil pan sub-assembly x Automatic transaxle case | 7.8 | 80 | 69 in.*lbf |
TRANSMISSION WIRE - TORQUE SPECIFICATIONS
VALVE BODY ASSEMBLY
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Shift solenoid valve S4 x Transmission valve body assembly | 11 | 110 | 8 |
| Shift solenoid valve DSL x Transmission valve body | 11 | 110 | 8 |
| Shift solenoid valve SLT x Transmission valve body | 6.6 | 67 | 58 in.*lbf |
| Shift solenoid valve SL2 x Transmission valve body | 11 | 110 | 8 |
| Shift solenoid valve SL1 x Transmission valve body | 6.6 | 67 | 58 in.*lbf |
| Transmission valve body x Automatic transaxle | 11 | 110 | 8 |
| Oil strainer x Valve body | 11 | 110 | 8 |
VALVE BODY ASSEMBLY - TORQUE SPECIFICATIONS
SHIFT LEVER
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Shift lever assembly x Body | 22 | 224 | 16 |
SHIFT LEVER - TORQUE SPECIFICATIONS
TRANSMISSION CONTROL CABLE ASSEMBLY
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Transmission control cable assembly x Control shaft lever | 12 | 122 | 9 |
| Transmission control cable assembly x Body | 5.0 | 51 | 44 in.*lbf |
| Transmission control cable assembly x Rear engine mounting insulator | 5.0 | 51 | 44 in.*lbf |
| Front upper No. 1 floor heat insulator x Body | 5.5 | 56 | 49 in.*lbf |
| Center exhaust pipe assembly x No. 2 center exhaust pipe assembly | 43 | 439 | 32 |
| Center exhaust pipe assembly x Front exhaust pipe assembly | 43 | 439 | 32 |
TRANSMISSION CONTROL CABLE ASSEMBLY - TORQUE SPECIFICATIONS
DIFFERENTIAL OIL SEAL
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Drive shaft bearing bracket x Engine assembly | 64 | 653 | 47 |
DIFFERENTIAL OIL SEAL - TORQUE SPECIFICATIONS
AUTOMATIC TRANSAXLE ASSEMBLY
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Speedometer driven hole cover x Automatic transaxle. | 7.0 | 71 | 61 in.*lbf |
| Transmission oil filler tube x Automatic transaxle | 5.5 | 56 | 49 in.*lbf |
| No. 1 transmission control cable bracket x Automatic transaxle | 12 | 122 | 9 |
| Engine mounting bracket LH x Automatic transaxle | 64 | 653 | 47 |
| Engine mounting bracket RR x Automatic transaxle | 45 | 459 | 33 |
| Front engine mounting bracket x Automatic transaxle | 64 | 653 | 47 |
| Transaxle housing x Engine block (Bolt A) | 64 | 653 | 47 |
| Transaxle housing x Engine block (Bolt B) | 46 | 469 | 34 |
| Transaxle housing x Engine block (Lower side mounting bolts) | 44 | 449 | 33 |
| Engine mounting insulator LH x Body | 95 | 969 | 70 |
| Front suspension crossmember x Body (Bolt A) | 145 | 1479 | 107 |
| Front suspension crossmember x Body (Bolt B) | 95 | 969 | 70 |
| Front suspension crossmember x Body (Nut) | 95 | 969 | 70 |
| Front suspension member rear brace LH x Front suspension crossmember | 145 | 1479 | 107 |
| Front suspension member rear brace LH x Body | 93 | 948 | 69 |
| Front crossmember x Body | 96 | 980 | 71 |
| Front crossmember x Front engine mounting insulator | 95 | 969 | 70 |
| No. 2 oil cooler tube x Automatic transaxle | 12 | 122 | 9 |
| Torque converter clutch x Drive plate | 41 | 418 | 30 |
| Rear engine mounting insulator x Rear engine mounting bracket | 95 | 969 | 70 |
| Front engine mounting insulator x Front engine mounting bracket | 145 | 1479 | 107 |
| Engine mounting insulator LH x Engine mounting bracket LH | 56 | 571 | 41 |
| Front suspension member reinforcement x Front suspension crossmember | 96 | 979 | 71 |
| Front suspension member reinforcement x Front crossmember | 96 | 979 | 71 |
| Front exhaust pipe x Exhaust manifold | 43 | 438 | 32 |
| Front exhaust pipe x Center exhaust pipe | 43 | 438 | 32 |
| Transmission control cable support x Automatic transaxle | 12 | 122 | 9 |
| No. 3 engine wire x Automatic transaxle | 26 | 265 | 19 |
| Engine wire clamp x Automatic transaxle | 13 | 133 | 10 |
| Air cleaner case x Engine mounting insulator LH | 7.0 | 71 | 62 in.*lbf |
| No. 2 battery carrier x Body | 19 | 194 | 14 |
AUTOMATIC TRANSAXLE ASSEMBLY - TORQUE SPECIFICATIONS
AUTOMATIC TRANSAXLE UNIT
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Differential gear lube apply tube x Transaxle housing | 5.4 | 55 | 48 in.*lbf |
| Front planetary gear lock nut | 280 | 2855 | 206 |
| Brake apply tube clamp x Transaxle case | 5.4 | 55 | 48 in.*lbf |
| Transaxle rear cover plate x transaxle rear cover | 7.5 | 76 | 66 in.*lbf |
| Transaxle rear cover x Transaxle case (Bolt A) | 19 | 194 | 14 |
| Transaxle rear cover x Transaxle case (Other bolt) | 25 | 255 | 18 |
| Pawl shaft clamp x Transaxle case | 9.8 | 100 | 7 |
| Oil pump assembly x Transaxle case | 22 | 226 | 16 |
| Transaxle housing x Transaxle case (Bolt A) | 22 | 220 | 16 |
| Transaxle housing x Transaxle case (Bolt B and C) | 29 | 300 | 21 |
| Parking lock pawl bracket x Transaxle case | 20 | 205 | 15 |
| Detent spring x Transaxle case (Bolt A) | 20 | 205 | 15 |
| Detent spring x Transaxle case (Bolt B) | 12 | 120 | 9 |
| No. 1 transaxle case plug | 7.4 | 75 | 65 in.*lbf |
| Oil cooler tube union x Transaxle case | 27 | 275 | 20 |
AUTOMATIC TRANSAXLE UNIT - TORQUE SPECIFICATIONS
OIL PUMP
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Oil pump body x Stator shaft assembly | 9.8 | 100 | 7 |
OIL PUMP - TORQUE SPECIFICATIONS
UNDERDRIVE PLANETARY GEAR
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Under drive planetary gear lock nut | 280 | 2855 | 207 |
UNDERDRIVE PLANETARY GEAR - TORQUE SPECIFICATIONS
DIFFERENTIAL CASE
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Front differential case x Front differential ring gear | 95 | 969 | 70 |
DIFFERENTIAL CASE - TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Clutch pedal sub-assembly x Clutch pedal support | 37 | 375 | 27 |
| Clutch pedal stopper bolt x Clutch pedal support | 16 | 160 | 12 |
| Clutch pedal support x Body for bolt | 24 | 241 | 17 |
| Clutch pedal support x Body for nut | 13 | 129 | 9 |
| Clutch master cylinder push rod clevis lock nut | 12 | 120 | 9 |
| Clutch master cylinder x Flexible hose tube | 14 (15) | 143 (154) | 10 (11) |
| Clutch master cylinder x Body | 13 | 129 | 9 |
| Clutch release cylinder bleeder plug x Clutch release cylinder | 8.3 | 85 | 73 in.*lbf |
| Clutch release cylinder x Transaxle housing | 12 | 122 | 9 |
| Clutch release cylinder x Flexible hose tube | 14 (15) | 143 (154) | 10 (11) |
| Clutch cover assembly x Flywheel sub-assembly | 19 | 195 | 14 |
| Release fork support x Transaxle assembly | 47 | 479 | 34 |
| Clutch start switch x Clutch pedal support | 16 | 160 | 12 |
| Clutch switch x Clutch pedal support | 16 | 160 | 12 |
| Clutch accumulator x Clutch release cylinder | 12 | 120 | 9 |
| Clutch accumulator x Bracket for bolt A for bolt B | 12 | 120 | 9 |
| 37 | 377 | 27 | |
| Release cylinder heat insulator x Clutch release cylinder | 12 | 120 | 9 |
| Flexible hose tube x Clutch accumulator | 14 (15) | 143 (154) | 10 (11) |
| (): for use without SST | |||
CLUTCH - TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf | |
|---|---|---|---|---|
| Floor shift lever assembly x Body | 12 | 122 | 9 | |
| Transmission control assembly x Body | 5.0 | 51 | 44 in.*lbf | |
| No. 1 front floor heat insulator x Body | 5.5 | 56 | 49 in.*lbf | |
| Engine hanger x Cylinder head | 38 | 387 | 28 | |
| Rear Engine mounting bracket x Transaxle | 45 | 459 | 33 | |
| Engine mounting bracket LH x Transaxle | 64 | 653 | 47 | |
| Front Engine mounting bracket x Transaxle | 64 | 653 | 47 | |
| Front Engine mounting insulator x Front Engine mounting bracket | 145 | 1479 | 107 | |
| Manual transaxle x Engine | Bolt A | 64 | 653 | 47 |
| Bolt B | 46 | 469 | 33 | |
| Bolt C | 44 | 449 | 32 | |
| Transmission case x Manual transaxle case | 29 | 296 | 21 | |
| Manual transaxle case X Transmission case | 29 | 296 | 21 | |
| Rear Bearing retainer x Transmission case | 43 | 438 | 32 | |
| Manual transaxle case receiver x Manual transaxle case | 7.0 | 71 | 62 in.*lbf | |
| No. 1 gear shift head x No. 2 gear shift fork shaft | 24 | 245 | 18 | |
| No. 1 gear shift fork x No. 1 gear shift fork shaft | 24 | 245 | 18 | |
| Reverse shift arm bracket x Manual transaxle case | 17 | 173 | 13 | |
| Reverse restrict pin plug x Transmission case | 13 | 133 | 10 | |
| No. 1 oil receiver pipe x Transmission case | 17 | 173 | 13 | |
| No. 2 oil receiver pipe x Transmission case | 17 | 173 | 13 | |
| Clutch tube bracket x Transmission case | 17 | 173 | 13 | |
| Reserve idler gear shaft bolt x Transmission case | 30 | 306 | 22 | |
| No. 3 transmission clutch hub gear shift fork shaft x Input shaft | 24 | 245 | 18 | |
| Manual transmission output rear set nut x Output shaft | 123 | 1254 | 90 | |
| Drain plug sub-assembly x Transmission case | 49 | 500 | 36 | |
| Manual transmission filler plug x Transmission case | 49 | 500 | 36 | |
| Back-up light switch assembly x Transmission case | 40 | 408 | 30 | |
| No. 1 lock ball assembly x Transmission case | 29 | 296 | 21 | |
| Speedometer driven hole cover sub-assembly set bolt | 5.5 | 56 | 49 in.*lbf | |
| Selecting bellcrank support x No. 2 selecting bellcrank plate washer | 12 | 120 | 9 | |
| Front differential ring gear x Front differential case | 106 | 1080 | 78 | |
| Engine mounting insulator LH x Body | 95 | 969 | 70 | |
| Engine mounting insulator LH x Engine mounting bracket LH | 56 | 571 | 41 | |
| Rear engine mounting insulator x Rear engine mounting bracket | 95 | 969 | 70 | |
| Front cross member sub-assembly x Body | 96 | 979 | 71 | |
| Control cable bracket x Manual transmission case | 17 | 173 | 13 | |
| Transmission control cable bracket x Rear engine mounting insulator | 5.0 | 51 | 44 in.*lbf | |
| Accumulator to flexible hose tube x Manual transmission case for bolt A for bolt B | 8.0 | 82 | 71 in.*lbf | |
| 12 | 122 | 9 | ||
| Battery carrier x Body | 19 | 189 | 14 | |
| Battery x Negative battery terminal | 5.4 | 55 | 48 in.*lbf | |
| Transmission oil baffle x Manual transmission case | 17 | 173 | 13 | |
| Manual transmission case cover x Manual transmission case | 29 | 296 | 21 | |
| Control shaft cover x Manual transmission case | 20 | 204 | 15 | |
| Shift gate pin x Manual transmission case | 29 | 296 | 21 | |
| Control shift lever x Shift and select lever shaft assembly | 12 | 120 | 9 | |
| Select bellcrank assembly x Manual transmission case | 20 | 204 | 15 | |
E351 MANUAL TRANSAXLE - TORQUE SPECIFICATIONS
FRONT DRIVE SHAFT ASSEMBLY
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Drive shaft bearing case x Drive shaft bracket | 64 | 650 | 47 |
| Front axle hub nut | 216 | 2203 | 159 |
| Front suspension lower arm x Lower ball joint | 89 | 908 | 66 |
| Front stabilizer link x Front shock absorber | 74 | 755 | 55 |
| Front speed sensor x Front axle hub | 8.5 | 87 | 75 in.*lbf |
| Tie rod end x Front axle hub | 49 | 500 | 36 |
| Front wheel | 103 | 1,050 | 76 |
FRONT DRIVE SHAFT ASSEMBLY - TORQUE SPECIFICATIONS
Axle
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Front wheel | 103 | 1050 | 76 |
| Rear wheel | 103 | 1050 | 76 |
| Front axle hub sub-assembly x Steering knuckle | 96 | 979 | 71 |
| Steering knuckle x Front shock absorber | 240 | 2447 | 177 |
| Front lower No. 1 suspension arm sub-assembly x Ball joint | 9 | 908 | 66 |
| Front disc brake caliper assembly x Steering knuckle | 107 | 1090 | 79 |
| Front axle hub nut x Front drive shaft assembly | 216 | 2203 | 160 |
| Front speed sensor bracket x Shock absorber | 29 | 296 | 21 |
| Flexible hose bracket x Steering knuckle | 29 | 296 | 21 |
| Front speed sensor x Steering knuckle | 8.5 | 87 | 75 in.*lbf |
| Rear axle hub and bearing assembly x Rear axle beam assembly | 90 | 918 | 67 |
| Rear disc brake caliper assembly x Rear axle beam assembly | 57 | 586 | 42 |
AXLE - TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf | |
|---|---|---|---|---|
| Front wheel | 103 | 1050 | 76 | |
| Rear wheel | 103 | 1050 | 76 | |
| Front shock absorber with coil spring x Body | 50 | 510 | 37 | |
| Front shock absorber with coil spring x Steering knuckle | 240 | 2447 | 177 | |
| Front shock absorber nut x Piston rod | 47 | 479 | 53 | |
| Front flexible hose x Steering knuckle | 29 | 296 | 21 | |
| Front speed sensor wire bracket x Front shock absorber with coil spring | 29 | 296 | 21 | |
| Front stabilizer link assembly x Front shock absorber with coil spring | 74 | 755 | 55 | |
| Front suspension crossmember sub-assembly x Body x Rear engine mounting insulator | Bolt A | 145 | 1479 | 107 |
| Bolt B | 95 | 969 | 70 | |
| Nut | 95 | 969 | 70 | |
| Front suspension member brace rear LH x Body | Bolt A | 145 | 1479 | 107 |
| Bolt B | 93 | 948 | 69 | |
| Front suspension member reinforcement LH x Member | 96 | 979 | 71 | |
| Front suspension member reinforcement RH x Member | 96 | 979 | 71 | |
| Front stabilizer link assembly LH x Front stabilizer bar | 74 | 755 | 55 | |
| Front lower No. 1 suspension arm sub-assembly x Front suspension crossmember sub-assembly (with out SST) | Bolt A | 233 | 2376 | 172 |
| Bolt B | 233 | 2376 | 172 | |
| Front lower No. 1 suspension arm sub-assembly x Front suspension crossmember sub-assembly (with SST) | Bolt A | 172 | 1755 | 127 |
| Bolt B | 233 | 2376 | 172 | |
| Front lower ball joint assembly x Front axle assembly | 133 | 1356 | 98 | |
| Front suspension member front race LH x Front suspension crossmember sub-assembly | 87 | 887 | 64 | |
| Front suspension member front race RH x Front suspension crossmember sub-assembly | 87 | 887 | 64 | |
| Rear shock absorber cushion retainer x Piston rod | 25 | 255 | 18 | |
| Rear shock absorber assembly (lower side) x Rear axle beam assembly | 90 | 918 | 67 | |
| No. 3 parking brake cable x Rear axle beam assembly | 6.0 | 61 | 53 in.*lbf | |
| No. 4 rear brake tube x Rear axle beam assembly | 8.5 | 87 | 75 in.*lbf | |
| Rear flexible hose LH x Rear axle beam assembly | 19 | 194 | 14 | |
| Rear flexible hose LH x Rear brake tuber | With out union nut wrench (10 mm) | 15 | 155 | 11 |
| With union nut wrench (10 mm) | 14 | 143 | 10 | |
| Rear flexible hose RH x Rear brake tube | With out union nut wrench (10 mm) | 15 | 155 | 11 |
| With union nut wrench (10 mm) | 14 | 143 | 10 | |
| Rear brake tube flexible hose (LH side) x Rear brake tube | With out union nut wrench (10 mm) | 15 | 155 | 11 |
| With union nut wrench (10 mm) | 14 | 143 | 10 | |
| Skid control sensor wire (LH side) x Rear axle beam assembly | 8.5 | 87 | 75 in.*lbf | |
| Rear floor side member brace sub-assembly | 54 | 550 | 40 | |
| Rear axle beam assembly x Body | 135 | 1377 | 100 | |
SUSPENSION - TORQUE SPECIFICATIONS
TIRE PRESSURE WARNING RECEIVER
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Tire pressure warning receiver x Body | 7.5 | 76 | 66 in.*lbf |
TIRE PRESSURE WARNING RECEIVER - TORQUE SPECIFICATIONS
TIRE PRESSURE WARNING VALVE AND TRANSMITTER
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Valve nut | 4.0 | 41 | 35 in.*lbf |
| Front wheel | 103 | 1050 | 76 |
| Rear wheel | 103 | 1050 | 76 |
TIRE PRESSURE WARNING VALVE AND TRANSMITTER - TORQUE SPECIFICATIONS
TIRE PRESSURE WARNING ECU
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Tire pressure warning ECU x Body | 7.5 | 76 | 66 in.*lbf |
TIRE PRESSURE WARNING ECU - TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Brake actuator bracket assembly x Brake actuator assembly | 5.4 | 55 | 48 in.*lbf |
| Brake actuator assembly x Body | 19 | 194 | 14 |
| Brake tube x Brake actuator assembly | 14 (15) | 143 (155) | 10 (11) |
| Negative battery terminal x Battery | 5.4 | 55 | 48 in.*lbf |
| Front speed sensor x Steering knuckle | 8.5 | 87 | 75 in.*lbf |
| Front speed sensor x Front shock absorber | 29 | 296 | 21 |
| Front speed sensor x Body | 8.5 | 87 | 75 in.*lbf |
| Front wheel | 103 | 1050 | 76 |
| Rear wheel | 103 | 1050 | 76 |
| Yaw rate and acceleration sensor x Body | 20 | 204 | 15 |
| (): For use without union nut wrench | |||
BRAKE CONTROL - TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Brake tube x Brake master cylinder sub-assembly | 14 (15) | 143 (155) | 10 (11) |
| Front disc brake bleeder plug x Disc brake cylinder assembly | 8.3 | 85 | 73 in.*lbf |
| Rear disc brake bleeder plug x Rear disc brake cylinder assembly | 11 | 112 | 8 |
| Push rod lock nut x Brake booster push rod | 26 | 265 | 19 |
| Brake pedal sub-assembly x Brake pedal support sub-assembly | 37 | 375 | 27 |
| Brake pedal support sub-assembly x Instrument panel reinforcement assembly | 24 | 241 | 17 |
| Brake pedal support sub-assembly x Brake booster | 13 | 129 | 9 |
| Negative battery terminal x Battery | 5.4 | 55 | 48 in.*lbf |
| Brake master cylinder sub-assembly x Brake booster assembly | 13 | 127 | 9 |
| Front wheel | 103 | 1050 | 76 |
| Front disc brake cylinder mounting x Steering knuckle | 107 | 1089 | 79 |
| Disc brake cylinder assembly x Front disc brake cylinder mounting | 34 | 350 | 25 |
| Front flexible hose x Disc brake cylinder assembly | 29 | 296 | 21 |
| Front flexible hose x Front shock absorber | 29 | 296 | 21 |
| Front flexible hose x Brake tube | 14 (15) | 143 (155) | 10 (11) |
| Rear wheel | 103 | 1050 | 76 |
| Rear disc brake cylinder mounting x Rear axle beam | 57 | 585 | 42 |
| Rear disc brake cylinder assembly x Rear disc brake cylinder mounting | 34 | 350 | 25 |
| Rear flexible hose x Rear disc brake cylinder assembly | 29 | 296 | 21 |
| Parking brake cable assembly x Rear axle beam | 6.0 | 61 | 53 in.*lbf |
| Rear flexible hose x Rear axle beam bracket (LH Side) | 19 | 194 | 14 |
| Rear flexible hose x Brake tube | 14 (15) | 143 (155) | 10 (11) |
| (): For use without union nut wrench | |||
BRAKE - TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| No. 1 parking brake cable assembly lock nut | 6.0 | 61 | 53 in.*lbf |
| Parking brake switch assembly x Parking brake lever sub-assembly | 0.9 | 9 | 8 in.*lbf |
| Parking brake lever sub-assembly x Body | 15 | 148 | 11 |
| Parking brake cable assembly set bolts | 6.0 | 61 | 53 in.*lbf |
| Front No. 2 floor heat insulator x Body | 5.5 | 56 | 49 in.*lbf |
| Front No. 1 floor heat insulator x Body | 5.5 | 56 | 49 in.*lbf |
| Console box mounting bracket x Body | 27 | 275 | 20 |
| Rear wheel | 103 | 1050 | 76 |
PARKING BRAKE - TORQUE SPECIFICATIONS
| Part tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Steering wheel assembly x Steering column assembly | 50 | 510 | 37 |
| No. 2 Steering intermediate shaft assembly x Steering intermediate shaft assembly | 35 | 360 | 26 |
| No. 2 Steering intermediate shaft assembly x Steering column assembly | 35 | 360 | 26 |
| Steering column x Instrument panel reinforcement assembly | 25 | 255 | 18 |
| Battery x Negative battery terminal | 5.4 | 55 | 48 in.*lbf |
STEERING COLUMN - TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Steering intermediate shaft assembly x Power steering gear | 35 | 357 | 26 |
| Power steering gear x Front suspension crossmember sub-assembly | 138 | 1407 | 102 |
| Tie rod end sub-assembly x Steering knuckle | 49 | 500 | 36 |
| Power steering ECU x Instrument panel reinforcement assembly | 8.0 | 82 | 71 in.*lbf |
| Front wheels x Front axle hub sub-assembly | 103 | 1050 | 76 |
POWER STEERING - TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Negative battery terminal x Battery | 5.4 | 55 | 48 in.*lbf |
AIR CONDITIONING - TORQUE SPECIFICATIONS
AIR CONDITIONING UNIT
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Cooler expansion valve x NO. 1 Cooler evaporator sub-assembly | 3.5 | 36 | 31 in.*lbf |
| Air conditioning unit x Instrument panel reinforcement | 9.8 | 100 | 87 in.*lbf |
| Air conditioning unit x Body | 9.8 | 100 | 87 in.*lbf |
| Ground wire x Instrument panel reinforcement | 8.4 | 87 | 74 in.*lbf |
| Power steering ECU assembly x Instrument panel reinforcement | 8.0 | 82 | 71 in.*lbf |
| Power steering ECU assembly x Body | 8.0 | 82 | 71 in.*lbf |
| Instrument panel brace sub-assembly x Instrument panel reinforcement : for nut | 9.8 | 100 | 87 in.*lbf |
| Instrument panel brace sub-assembly x Air conditioning unit : for screw | 9.8 | 100 | 87 in.*lbf |
| Instrument panel brace sub-assembly x Body : for bolt | 9.8 | 100 | 87 in.*lbf |
| No. 1 air duct sub-assembly x Body | 9.8 | 100 | 87 in.*lbf |
| Suction pipe sub-assembly x Cooler expansion valve | 9.8 | 100 | 87 in.*lbf |
AIR CONDITIONING UNIT - TORQUE SPECIFICATIONS
COMPRESSOR
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Stud bolt x Oil pan sub-assembly | 9.8 | 100 | 87 in.*lbf |
| Compressor x Oil pan sub-assembly | 25 | 255 | 18 |
| Discharge hose sub-assembly x Compressor | 9.8 | 100 | 87 in.*lbf |
| Suction hose sub-assembly x Compressor | 9.8 | 100 | 87 in.*lbf |
COMPRESSOR - TORQUE SPECIFICATIONS
CONDENSER
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Cooler dryer x Condenser | 2.9 | 30 | 26 in.*lbf |
| Air conditioning tube and accessory assembly x Condenser | 5.4 | 55 | 48 in.*lbf |
| Discharge hose sub-assembly x Condenser | 5.4 | 55 | 48 in.*lbf |
| No. 2 fan shroud x Radiator | 11 | 112 | 8 |
| No. 1 water hose clamp bracket x Hood lock support sub-assembly | 5.0 | 51 | 44 in.*lbf |
| Battery carrier x Hood lock support sub-assembly | 17 | 168 | 12 |
| Battery carrier x Nut | 3.5 | 35 | 31 in.*lbf |
CONDENSER - TORQUE SPECIFICATIONS
| Part tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Steering pad assembly x Steering wheel assembly | 8.8 | 90 | 78 in.*lbf |
| Steering wheel assembly x Steering column assembly | 50 | 510 | 37 |
| Front passenger airbag x Instrument panel reinforcement | 20 | 203 | 14 |
| Curtain shield airbag assembly x Body | 13 | 133 | 10 |
| Center airbag sensor assembly x Body | 18 | 178 | 13 |
| Front airbag sensor x Body | 9.0 | 92 | 80 in.*lbf |
| Side airbag sensor x Body | 9.0 | 92 | 80 in.*lbf |
| Rear airbag sensor x Body | 9.0 | 92 | 80 in.*lbf |
| Seat position airbag sensor x Seat frame | 8.0 | 82 | 71 in.*lbf |
| Occupant classification ECU x Seat frame | 3.0 | 31 | 27 in.*lbf |
SUPPLEMENTAL RESTRAINT SYSTEM - TORQUE SPECIFICATIONS
FRONT SEAT BELT
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Front seat inner belt assembly x Front seat | 41 | 420 | 30 |
| Front shoulder belt anchor adjuster assembly x Body | 41 | 420 | 30 |
| Front seat outer belt assembly (Upper part of retractor) x Body | 5.0 | 51 | 44 in.*lbf |
| Front seat outer belt assembly (shoulder anchor) x Body | 41 | 420 | 30 |
| Front seat outer belt assembly (floor anchor) x Body | 41 | 420 | 30 |
FRONT SEAT BELT - TORQUE SPECIFICATIONS
REAR SEAT BELT
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Rear Seat Inner Belt Assembly RH x Seat | 41 | 420 | 30 |
| Rear Seat Inner Belt Assembly LH x Seat | 41 | 420 | 30 |
| Rear seat outer belt assembly x Body | 41 | 420 | 30 |
| Rear center seat outer belt assembly x Body | 41 | 420 | 30 |
REAR SEAT BELT - TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbft.*lbf |
|---|---|---|---|
| Clutch switch assembly x Clutch pedal | 16 | 160 | 12 |
| Negative battery terminal x Battery | 5.4 | 55 | 48 in.*lbf |
CRUISE CONTROL - TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Rear combination light assembly x Body | 3.2 | 32 | 28 in.*lbf |
| Front door courtesy switch x Body | 12 | 120 | 9 |
| Rear door courtesy switch x Body | 12 | 120 | 9 |
| Back door lock assembly x Back door panel | 13 | 127 | 9 |
| Negative battery terminal x Battery | 5.4 | 55 | 48 in.*lbf |
LIGHTING - TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Front wiper motor x Windshield wiper link assembly | 7.5 | 76 | 66 in.*lbf |
| Front wiper motor and link x Cowl top panel outer | 5.5 | 56 | 49 in.*lbf |
| Front wiper arm and blade assembly LH x Windshield wiper link assembly | 26 | 265 | 19 |
| Front wiper arm and blade assembly RH x Windshield wiper link assembly | 26 | 265 | 19 |
| Rear wiper motor x Back door panel | 5.5 | 56 | 49 in.*lbf |
| Rear wiper arm and blade x Rear wiper motor | 5.5 | 56 | 49 in.*lbf |
| Windshield washer jar assembly x Body | 5.5 | 56 | 49 in.*lbf |
| Negative battery terminal x Battery | 5.4 | 55 | 48 in.*lbf |
WIPER AND WASHER - TORQUE SPECIFICATIONS
FRONT DOOR LOCK
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Door lock assembly x Door panel | 5.0 | 51 | 44 in.*lbf |
FRONT DOOR LOCK - TORQUE SPECIFICATIONS
REAR DOOR LOCK
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Door lock assembly x Door panel | 5.0 | 51 | 44 in.*lbf |
REAR DOOR LOCK - TORQUE SPECIFICATIONS
BACK DOOR LOCK
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Door lock assembly x Door panel | 13 | 127 | 9 |
BACK DOOR LOCK - TORQUE SPECIFICATIONS
DOOR CONTROL RECEIVER
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Door lock control receiver x Body | 5.0 | 51 | 44 in.*lbf |
DOOR CONTROL RECEIVER - TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Negative battery terminal x Battery | 5.5 | 55 | 48 in.*lbf |
METER - TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| No. 2 amplifier antenna assembly x Body | 7.0 | 71 | 62 in.*lbf |
| Amplifier antenna assembly x Instrument panel reinforcement assembly | 8.4 | 85 | 74 in.*lbf |
| Negative battery terminal x Battery | 5.5 | 55 | 48 in.*lbf |
REAR PACKAGE TRAY SPEAKER - TORQUE SPECIFICATIONS
HORN
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Low pitched horn x Body | 20 | 199 | 14 |
| High pitched horn x Body | 20 | 199 | 14 |
HORN - TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Rear power window regulator motor assembly x Rear door window regulator assembly | 5.4 | 55 | 48 in.*lbf |
| Rear door window division bar x Rear door panel | 6.2 | 63 | 54 in.*lbf |
| Front power window regulator motor assembly x Front door window regulator assembly | 5.4 | 55 | 48 in.*lbf |
| Negative battery terminal x Battery | 5.4 | 55 | 48 in.*lbf |
WINDSHIELD / WINDOW GLASS - TORQUE SPECIFICATIONS
MIRROR
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Outer rear view mirror assembly x Door panel | 8.0 | 82 | 71 in.*lbf |
MIRROR - TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Instrument panel reinforcement x Passenger airbag | 20 | 204 | 15 |
| Radio bracket x Instrument panel reinforcement assembly | 23 | 229 | 17 |
INSTRUMENT PANEL - TORQUE SPECIFICATIONS
Front Seat Assembly
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Occupant classification ECU x Seat frame | 3.0 | 31 | 27 in.*lbf |
| Front seat armrest assembly x Seat frame | 20 | 200 | 14 |
| Seat position sensor x Seat adjuster frame | 8.0 | 82 | 71 in.*lbf |
| Front seat side airbag assembly x Seat frame | 5.5 | 56 | 49 in.*lbf |
| Front seat inner belt x Seat adjuster frame | 41 | 420 | 30 |
| Front seat x Body | 37 | 375 | 27 |
FRONT SEAT ASSEMBLY - TORQUE SPECIFICATIONS
Rear Seat Assembly
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Rear seatback lock assembly x Rear seatback frame sub-assembly | 30 | 306 | 22 |
| Rear center seat belt outer assembly x Rear seatback frame sub-assembly (fro RH side) | 41 | 420 | 30 |
| Rear seatback assembly x Body | 42 | 428 | 31 |
REAR SEAT ASSEMBLY - TORQUE SPECIFICATIONS
HOOD
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Hood x Hood hinge | 13 | 133 | 10 |
| Hood lock assembly x Body | 7.5 | 76 | 66 in.*lbf |
HOOD - TORQUE SPECIFICATIONS
HOOD LOCK CONTROL CABLE ASSEMBLY
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Hood lock assembly x Body | 7.5 | 76 | 66 in.*lbf |
| Water hose clamp bracket x Body | 5.0 | 51 | 44 in.*lbf |
HOOD LOCK CONTROL CABLE ASSEMBLY - TORQUE SPECIFICATIONS
FRONT DOOR
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Door check x Body | 30 | 306 | 22 |
| Door check x Door panel | 5.5 | 56 | 49 in.*lbf |
| Door lower rear frame x Door panel | 6.2 | 63 | 55 in.*lbf |
| Door glass x Door window regulator | 8.0 | 82 | 71 in.*lbf |
| Door window regulator x Door panel | 8.0 | 82 | 71 in.*lbf |
| Door upper hinge x Body | 26 | 265 | 19 |
| Door upper hinge x Door panel | 26 | 265 | 19 |
| Door lower hinge x Body | 26 | 265 | 19 |
| Door lower hinge x Door panel | 26 | 265 | 19 |
| Door lock striker x Body | 23 | 235 | 17 |
| Door outside handle cover x Door panel | 4.0 | 41 | 35 in.*lbf |
| Door outside handle frame x Door panel | 4.0 | 41 | 35 in.*lbf |
| Separation door stiffener cushion x Door panel | 12 | 122 | 9 |
| Door inside panel reinforcement rear extension x Door panel | 6.2 | 53 | 55 in.*lbf |
FRONT DOOR - TORQUE SPECIFICATIONS
REAR DOOR
| Part Tightened | N*m | Kgf*cm | Kgf*cm |
|---|---|---|---|
| Door check x Body | 30 | 306 | 22 |
| Door check x Door panel | 8.0 | 82 | 71 in.*lbf |
| Door window division bar x Door panel | 8.0 | 82 | 71 in.*lbf |
| Door upper hinge x Body | 26 | 265 | 19 |
| Door upper hinge x Door panel | 26 | 265 | 19 |
| Door lower hinge x Body | 26 | 265 | 19 |
| Door lower hinge x Door panel | 26 | 265 | 19 |
| Door window division bar x Door panel | 6.2 | 63 | 55 in.*lbf |
| Door lock striker x Body | 23 | 235 | 14 |
| Door outside handle cover x Door panel | 4.0 | 41 | 35 in.*lbf |
| Door outside handle frame x Door panel | 4.0 | 41 | 35 in.*lbf |
| Window regulator x Door panel | 8.0 | 82 | 71 in.*lbf |
REAR DOOR - TORQUE SPECIFICATIONS
BACK DOOR
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Back door hinge x Door panel | 20 | 199 | 14 |
| Back door hinge x Body | 20 | 199 | 14 |
| Door lock striker x Body | 12 | 17 | 9 |
BACK DOOR - TORQUE SPECIFICATIONS
BACK DOOR SUPPORT
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Back door damper stay upper bracket x Body | 7.0 | 71 | 62 in.*lbf |
| Back door damper stay lower bracket x Back door panel | 7.0 | 71 | 62 in.*lbf |
BACK DOOR SUPPORT - TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Front bumper reinforcement sub-assembly x Body | 50 | 510 | 37 |
| Rear bumper arm sub-assembly LH x Body | 50 | 510 | 37 |
| Rear bumper arm sub-assembly RH x Body | 50 | 510 | 37 |
| No. 1 Rear bumper reinforcement x Rear bumper arm sub-assembly | 50 | 510 | 37 |
| Rear bumper cover x Body | 5.5 | 56 | 49 in.*lbf |
| Back door outside garnish x Back door panel | 4.9 | 50 | 43 in.*lbf |
EXTERIOR - TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| No. 2 antenna cord sub-assembly x Body | 7.0 | 71 | 62 in.*lbf |
| Front seat outer belt assembly (for Through Anchor) x Front shoulder belt anchor adjuster assembly | 41 | 420 | 30 |
| Rear seat outer belt assembly (for Floor Anchor) x Body | 41 | 420 | 30 |
| Rear seat back hinge x Body | 18 | 185 | 13 |
| Negative battery terminal x Battery | 5.4 | 55 | 48 in.*lbf |
INTERIOR - TORQUE SPECIFICATIONS