Draining Procedure
- Drain the oil from both the suction and discharge ports of the removed compressor into a clean, graduated container. Rotate the compressor shaft to assist in draining the compressor.
- Measure and record the amount of oil drained from the removed compressor. This measurement will be used during installation of the replacement compressor.
- Inspect the polyalkylene glycol (PAG) oil for the following conditions: The color of the oil is dark brown or black. There is a presence of foreign substances, metal fillings, etc. in the oil. If the receiver-dehydrator is not replaced, damage to A/C compressor will occur.
- Properly discard the used refrigerant oil.