Tightening Torques
| Torque (Nm) | Torque (lbf ft) | |
|---|---|---|
| Reverse shaft | 24 | 18 |
| Reverse shaft support | 20 + 120° | 15+ 120° |
| Reverse gear selector fork | 24 | 18 |
| Reversing-light switch | 24 | 18 |
| Rear engine mounting gearbox | 75 | 55 |
| Rear engine cushion engine mounting | 45 | 33 |
| Rear engine cushion subframe | 24 | 18 |
| Subframe/body | 100 +45? | 74 +45? |
| Mating face engine/gearbox | 70 | 50 |
| Mating face gear case/clutch housing | 24 | 18 |
| Differential bearing race, seal retainer | 24 | 18 |
| Wheel bolts | 110 | 80 |
| End cover retaining screws | 24 | 18 |
| Input shaft bearing support | 38 | 28 |
| Link arm -ball joint | 33 | 24 |
| Universal joint driver, gear selector rod | 24 | 18 |
| Engine cushion, left | 45 | 33 |
| Level plug | 50 | 37 |
| Oil drain plug | 50 | 37 |
| Oil filler plug | 50 | 37 |
| Slave cylinder | 10 | 7 |
| Final gear wheel | 20 +90? | 15 +90? |
| Suspension arm | 90 | 66 |
| Steering gear | 90 | 66 |
| Support plate/subframe | 60 | 44 |
| Output shaft bearing support (countersunk screw head) | 45 | 33 |
| Output shaft bearing support (cylindrical screw head) | 24 | 18 |
| Gearbox mounting | 40 | 30 |
| Outer ball joint, steering swivel member | 100 +45? | 74 +45? |
TIGHTENING TORQUE SPECIFICATION