Undersize -0.50

Undersize -0.50 Saab 9-5 I рестайлинг

Marking cyl. Block	0		1
Size main bearing seat	72.0000-72.0065		72.0065-72.0130
Marking crankshaft
Size main bearing journals	67.480-67.488	67.488-67.496	67.480-67.488	67.488-67.496
Main bearing cup in cylinder block	Brown/white	Brown/white	Green/white	Green/white
Bearing cup in bearing cap	Green/white	Brown/white	Green/white	Brown/white
Resulting bearing clearance (mm)	0.0160-0.0425	0.0140-0.0405	0.0165-0.0430	0.0145-0.0410

CRANKSHAFT MAIN BEARINGS TECHNICAL SPECIFICATIONS (UNDERSIZE - 0.50)

Permitted resulting bearing clearance mm

0.0140-0.0430

CRANKSHAFT MAIN BEARINGS CLEARANCE SPECIFICATIONS

Brown		Green	Brown/blue	Green/blue	Brown/white	Green/white
Bearing thickness (mm)	1.989- 1.995	1.998-2.001	2.114-2.120	2.120-2.126	2.239-2.245	2.245-2.251

CRANKSHAFT BEARINGS THICKNESS SPECIFICATIONS

WARNING

Always measure the bearing clearance before assembling the engine.

IMPORTANT

The main bearing halves in bearing caps 2 and 3 have no oilway.

Scheme 798: Valve gear

The exhaust valve (1) is available in two oversizes

+0.075 mm	Diameter 6.020-6.035
+0.150 mm	Diameter 6.095-6.110

EXHAUST VALVE SPECIFICATIONS

The inlet valve (2) is available in two oversizes

+0.075 mm	Diameter 6.030-6.045
+0.150 mm	Diameter 6.105-6.120

INLET VALVE SPECIFICATIONS

Scheme 800: Valve springs

Length, free mm	Approx. 41.8
Length, when subjected to a compression force of 252-288 N mm	34
Length, when subjected to a compression force of 630-680 N mm	24

VALVE SPRING SPECIFICATIONS

Scheme 801: Camshafts

Bearing journals mm	27.939-27.960
End float mm	0.040-0.144
Cam lift mm	10

CAMSHAFTS TECHNICAL SPECIFICATIONS (GENERAL)

	Inlet valves		Exhaust valves
	Open	Close	Open	Close
Crankshaft angle, valve opening	7.5° BTDC	79.5° ABDC	56.5° BBDC	30.5° ATDC
Valve completely open	119° ATDC		109.5° BTDC

INLET AND EXHAUST VALVE OPENING AND CLOSING TECHNICAL SPECIFICATIONS

Scheme 802: Lubricating system

Oil capacity dry engine, including that in oil filter	5.0
Oil capacity at oil change	4.5
Difference in volume, max-min	1.0
Oil pump pressure-reducing valve opens at bar	4.51
Grade of oil	See Owners Manual for Engine Oil specifications, Oil filter
Viscosity	See Owners Manual for Engine Oil specifications, Oil filter

LUBRICATION SYSTEM TECHNICAL SPECIFICATIONS (GENERAL)

IMPORTANT

The recommended grades of oil contain all necessary additives and the use of additional additives should therefore be avoided.

Note. The same oil filter as for the 4-cylinder SAAB 9-5 should be used.

Undersize -0.50 Saab 9-5 I рестайлинг