Tightening Torques
| Hub center-nuts, front IMPORTANT: Always fit a new hub-center nut if it has been removed because the clamping force of the lock indentations will be reduced if the old one is refitted. | 230 Nm | 170 lbf ft |
|---|---|---|
| Rear hub to longitudinal link | 50 Nm +30° | 40 lbf ft +30° |
| IMPORTANT |
|---|
| Always fit a new hub-center nut if it has been removed because the clamping force of the lock indentations will be reduced if the old one is refitted. |
TORQUES SPECIFICATION
Scheme 1
Removing the ball joint and steering link
86 12 814 Toolboard T2 Chassis-Body
Group: Chassis
| 9000 | 900-M93 | 900/9-3 | 9-5 |
|---|---|---|---|
| X | X | X | X |
SPECIAL TOOLS