Fitting Saab 9-3 II

Fitting

Note. It is recommended that 2 people carry out steps 1 , 2 , and 3 .

Scheme 552

Scheme 553

Scheme 554

1. Lift the bonnet back into place.
2. Fit the bolts
3. Assemble the bonnet damper's upper mounting in the bonnet. Tighten the bolts.
4. Fit the hose on the hinge cover.
5. Fit the hinge covers. Make sure the clips engage properly.
6. Connect the washer hose to the quick connector. Place the washer hose under the cowl cover.
7. Fit the washer hose's clips under the cowl cover.
8. Fit the cowl cover's clips
9. Fit the rear bonnet seal.
10. Check the bonnet's alignment and the function of the bonnet lock and washers.