Home/Saab/9-2X/Saab 9-2X I (2004-2006)/Repair manual/Cruise Control Systems/Speed Control Systems: Removal & Installation
Contents Wiring diagrams Section: Cruise Control Systems All sections

Speed Control Systems: Removal & Installation Saab 9-2X I

Cruise Control Systems 1 illustration

Removal

Disconnect the ground cable from battery.

Disconnect the connector.

Remove the nut securing accelerator pedal assembly.

Scheme 2

Scheme 2: Removal

Installation

Install in the reverse order of removal.

Tightening torque

18 Nm (1.8 kgf-m, 13.0 ft-lb)