Home/RAM/Pickup 2500/RAM Pickup 2500 (2011-2012)/Repair manual/Suspension Front/Front Suspension & Wheel Alignment: Maintenance

Contents

Wiring diagrams Section: Suspension Front

All sections

Front Suspension & Wheel Alignment: Maintenance RAM Pickup 2500

Suspension Front 1 illustration

STANDARD PROCEDURE - OUTER TIE ROD END LUBRICATION

Note. View in illustration is typical.

Scheme 46

Scheme 46: STANDARD PROCEDURE - OUTER TIE ROD END LUBRICATION

Scheme 46: STANDARD PROCEDURE - OUTER TIE ROD END LUBRICATION

Note. If a new tie rod end is to be installed, make sure the boot (2) is properly lubricated.

Any time the outer tie rod end is disconnected from the knuckle, before assembly, clean all old grease and debris from the boot with a clean cloth and apply outer tie rod grease P/N 68088623AA (1) to the boot (2) as shown in illustration.