Home ReviewsRefund
Home/RAM/Pickup 2500/RAM Pickup 2500 (2011-2012)/Repair manual/Manual & Power Steering/Steering System: Overhaul
Contents Wiring diagrams Section: Manual & Power Steering All sections

Steering System: Overhaul RAM Pickup 2500

Manual & Power Steering

ASSEMBLY

  1. Position the gearshift lever assembly (2), install the retaining screws and tighten to 12 N.m (105 in. lbs.).
  2. Connect the shift cable to the lever (2).
  3. Connect the gearshift harness connector (5).
  4. Ensure the gear shift lever and transmission are in the PARK position and snap the cable adjust clip in place.
  5. Install the upper and lower column shrouds, steering column opening cover, and reinforcement. Refer to «SHROUD, Steering Column , Installation»(ref-457772-S40265822092012030200000) .
  6. Connect the negative battery cable.

More articles — Steering System