Home ReviewsRefund
Home/RAM/Pickup 2500/RAM Pickup 2500 (2011-2012)/Repair manual/Body - Interior & Exterior/PICKUP BOX
Contents Wiring diagrams Section: Body - Interior & Exterior All sections

PICKUP BOX RAM Pickup 2500

Body - Interior & Exterior ~156 words

PICKUP BOX

Note. Long cargo box shown in illustration. Short cargo box similar.

  1. Position the cargo box (1) onto the frame (2) and loosely install the bolts (3) (six short box, eight long box).
  2. Align the cargo box to the cab and tighten the bolts to 108 N.m (80 ft. lbs.).
  3. If removed, install tail lamp units and wire harness onto the cargo box. Refer to «LAMP, Tail Stop Turn , Installation»(ref-457789-S12037891322012030200000) .
  4. Connect the tail lamp wire harness to the underbody wire harness.
  5. If removed, install the tailgate. Refer to «TAILGATE , Installation»(ref-457777-S32225083322012030200000) .
  6. If removed, install the rear bumper. Refer to «BUMPER, Rear , Installation»(ref-457829-S42502290292012030200000) .
  7. If removed, install the fuel filler door. Refer to «DOOR, Fuel Fill , Installation»(ref-457777-S03404740322012030200000) .
  8. Position the fuel filler (2) to the cargo box (3).
  9. Connect the fuel filler neck at the fuel tank. Refer to «TANK, Fuel , Installation»(ref-457834-S16248629162012030200000) or «TANK, Fuel , Installation»(ref-457834-S08458027032012030200000) .