Mopar - Accessories: Removal & Installation RAM Pickup 2500

WIN MODULE INSTALLATION

1. Connect the WIN electrical connector.
2. Connect the antenna connector to the WIN.
3. Install the WIN (2) into the to instrument panel.
4. Position the steering column opening cover (2) to the instrument panel and fully engage the retainer clips to the instrument panel.
5. Install the Data Link Connector (3) to the steering column opening cover (2) by pushing the connector through the opening on the back side of the cover and fully engaging the lock tabs (1) of the connector.
6. Install the two fasteners (2) that secure the steering column opening cover (1) to the instrument panel.
7. Position the hood release handle onto the column opening cover and fully engage the retainer clip that secures the hood release handle to the steering column opening cover.
8. Connect the negative battery cable.