Removing side window
Installation Location
Scheme 124
Scheme 125
1. Folding down roof lining
Note. Make sure that the roof cover does not buckle.
1.1. Carefully fold down roof lining -1- in the rear, side area ( -arrow A- ). (Scheme 125)
2. Removing side window
Scheme 126
2.1. Unscrew and remove fastening nuts -2- on the side-window opening ( -arrow B- ). (Scheme 126)
Scheme 127
2.2. Push side window -3- outward in the lower area -arrows C- and swivel it forward ( -arrow D- ). (Scheme 127)
Scheme 128
Scheme 129
2.3. Disengage connecting piece -6- of the side window trim strip -4- to the roof trim strip -5-. To do this, first pull the side window down slightly -arrow E- and then swivel it to the rear ( -arrow F- ). (Scheme 129), (Scheme 128).
2.4. Remove side window -3- to the outside. see scheme 147
3. Checking clips
3.1. Check fastening clips on the C-pillar -7- for damage; if necessary, replace them. see scheme 148
4. Check seals -- only if the side window is to be re-installed