Installing Tiptronic control unit
Installation Location
Scheme 125
1. Insert control unit into the support -A- until the locking tabs -B- are felt to engage. (Scheme 120)
Scheme 126
2. Connect the two connectors -A- and push in the locking mechanism -B- until it is felt to engage. (Scheme 121)
3. Place the support with the two control units in installation position -C-. (Scheme 121)
Scheme 127
4. Move seat all the way back and tighten the support with the fastening screw.
5. If the Tiptronic control unit is replaced, observe the points under coding the control unit. > 373019 Removing and installing Tiptronic control unit - chapter on "Coding"
Scheme 128
Note. Only for vehicles with telephone
6. Position the support for the telephone control unit and screw down using the three fastening nuts.