Checking seat following removal
1. Connect the removed seat to the vehicle's wiring harness via test cable P 9745 and test cable P 9745/1 .
2. Connect electric plug to control module trim panel. > 721619 Removing and installing control module trim panel - section on "Installing"
3. Connect the battery. Refer to 27 06 IN External power connection, jump lead starting - as of MY 2005 (All Models) .
4. Switch on ignition.
5. Carry out a function check on the seat components.
6. Switch off ignition after function test and disconnect battery.
7. Disconnect test cable P 9745 and test cable P 9745/1 .
1. Connect the removed seat to the vehicle's wiring harness via test cable P 9745 and test cable P 9745/1 .
2. Connect electric plug to control module trim panel. > 721619 Removing and installing control module trim panel - section on "Installing"
3. Connect the battery. Refer to 27 06 IN External power connection, jump lead starting - as of MY 2005 (All Models) .
4. Switch on ignition.
5. Carry out a function check on the seat components.
6. Switch off ignition after function test and disconnect battery.
7. Disconnect test cable P 9745 and test cable P 9745/1 .
1. Connect the removed seat to the vehicle's wiring harness via test cable P 9745 and test cable P 9745/1 .
2. Connect electric plug to control module trim panel. > 721619 Removing and installing control module trim panel - section on "Installing"
3. Connect the battery. Refer to 27 06 IN External power connection, jump lead starting - as of MY 2005 (All Models) .
4. Switch on ignition.
5. Carry out a function check on the seat components.
6. Switch off ignition after function test and disconnect battery.
7. Disconnect test cable P 9745 and test cable P 9745/1 .
1. Connect the removed seat to the vehicle's wiring harness via test cable P 9745 and test cable P 9745/1 .
2. Connect electric plug to control module trim panel. > 721619 Removing and installing control module trim panel - section on "Installing"
3. Connect the battery. Refer to 27 06 IN External power connection, jump lead starting - as of MY 2005 (All Models) .
4. Switch on ignition.
5. Carry out a function check on the seat components.
6. Switch off ignition after function test and disconnect battery.
7. Disconnect test cable P 9745 and test cable P 9745/1 .
1. Connect the removed seat to the vehicle's wiring harness via test cable P 9745 and test cable P 9745/1 .
2. Connect electric plug to control module trim panel. > 721619 Removing and installing control module trim panel - section on "Installing"
3. Connect the battery. Refer to 27 06 IN External power connection, jump lead starting - as of MY 2005 (All Models) .
4. Switch on ignition.
5. Carry out a function check on the seat components.
6. Switch off ignition after function test and disconnect battery.
7. Disconnect test cable P 9745 and test cable P 9745/1 .