INSTALLING PARTICLE FILTER Porsche Boxster 986 рестайлинг

INSTALLING PARTICLE FILTER

1. Insert a new particle filter into the housing guide.
2. Check that the filter is correctly fitted and in the correct installation position.
3. Insert antenna part at the top, screw in both top and bottom fastening screws. Tightening torque 6 Nm (4.5 ft.lb).

Scheme 76

1. Open the luggage compartment lid.
2. Remove the luggage compartment mat on the wheel housing wall.
3. Open the cover for the headlight adjustment screws.
4. Clean the cover lens and switch on the dipped beam headlights. NOTE: The vehicle must be on a horizontal surface! Make the adjustment with the regulator switch set to 0 (headlight beam adjustment)! Use a standard 5 mm ball-head screwdriver to make the headlight adjustment (free blade length 150 mm)! Only the lower screw may be turned for height adjustment; for lateral adjustment the upper and lower screws must be turned in the same direction and for the same number of rotations!
5. Make the adjustment with the vehicle ready for driving (fuel tank full, driver's seat occupied by a person or 75 kg, the tire pressure must correspond to the stipulated values) using a headlight adjustment unit. Lateral adjustment Height and lateral adjustment Fog light adjustment