Home/Porsche/Boxster S/Porsche Boxster S 986 рестайлинг (2002-2004)/Repair manual/Radio/INSTALLING DISPLAY AND OPERATOR CONTROL UNIT (PCM)

Contents

Section: Radio

SETTING HANDSFREE MICROPHONE TO THE TELEPHONE TYPE

SETTING

REMOVING AND INSTALLING SENSOR FOR PARK ASSISTANT

INSTALLATION

PARKASSISTENT, WIRING HARNESS

PARKASSISTENT CONTROL MODULE

REMOVING AND INSTALLING DISPLAY AND OPERATOR CONTROL UNIT (PCM)

PROCEDURE FOR CHANGING THE "K-NUMBER" ON PCM CONTROL MODULE (AS OF PST2 SOFTWARE 13.0)

INSTALLING DISPLAY AND OPERATOR CONTROL UNIT (PCM)

CONNECTING AND SWITCHING ON THE PORSCHE SYSTEM TESTER 2

DEVICE CODE INPUT

REMOVING DISPLAY AND OPERATOR CONTROL UNIT (PCM 2)

INSTALLING DISPLAY AND OPERATOR CONTROL UNIT (PCM 2)

TEACHING DISPLAY AND OPERATOR CONTROL UNIT (PCM 2)

REMOVING AND INSTALLING THE NAVIGATION UNIT

REMOVING AND INSTALLING GPS ANTENNA

RETROFITTING MOBILE COMMUNICATION SYSTEMS

GENERAL

PROCEDURE AFTER COMMISSIONING

PROCEDURE AFTER CHANGING A TIRE

PROCEDURE AFTER THE POWER SUPPLY HAS BEEN INTERRUPTED

REMOVING AND INSTALLING CONTROL MODULE FOR PARKING ASSISTANT

REDUCED SOUND QUALITY IN ONE OR MORE LOUDSPEAKERS

REMEDYING PROBLEMS WITH THE AMPLIFIER

INTERFERENCE NOISES

INTERFERENCE NOISES, CHECKING CABLE CONNECTIONS

INTERFERENCE NOISES DUE TO ALTERNATOR

INTERFERENCE NOISES DUE TO ENGINE

INTERFERENCE NOISE DUE TO ANTENNA

INTERFERENCE NOISES DUE TO POWER SUPPLY

INTERFERENCE NOISES DUE TO ALL LOUDSPEAKERS

ELECTROMAGNETIC COMPATIBILITY (EMC) - TROUBLESHOOTING

REMOVING LOUDSPEAKER AMPLIFIER

REMOVING AND INSTALLING CONTROL UNIT FOR THE TELEPHONE

REMOVING SUBWOOFER

INSTALLING SUBWOOFER

REMOVING THE ANTENNA AMPLIFIER

All sections

INSTALLING DISPLAY AND OPERATOR CONTROL UNIT (PCM) Porsche Boxster S 986 рестайлинг

Radio

INSTALLING DISPLAY AND OPERATOR CONTROL UNIT (PCM)

Note. After installation of a new display and operator control unit, the system must be activated with the Porsche System Tester 2!

Engage the electrical plug connections and carefully lay the electrical leads (do not pinch).
Connect and switch on the Porsche System Tester 2.