Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Battery Negative Cable Terminal Bolt | 15 N.m | 11 lb ft |
| Battery Positive Cable Terminal Bolt | 15 N.m | 11 lb ft |
| Battery Hold Down Retainer Bolt | 18 N.m | 13 lb ft |
| Generator Bolts | 20 N.m | 15 lb ft |
| Generator Electrical Connector | 17 N.m | 13 lb ft |
| Negative Battery Cable Ground Stud | 25 N.m | 18 lb ft |
| Positive Battery Cable to Starter Solenoid Nut | 17 N.m | 13 lb ft |
| Starter Motor bolts | 40 N.m | 30 lb ft |
| Starter Motor Solenoid S Terminal Nut | 3 N.m | 27 lb in |
| Wire Harness Retainer Nut | 18 N.m | 13 lb ft |
Fastener Tightening Specifications
Scheme 10
Reserve Capacity
Reserve capacity is the amount of time in minutes it takes a fully charged battery, being discharged at a constant rate of 25 amperes and a constant temperature of 27°C (80°F) to reach a terminal voltage of 10.5 volts. Refer to Battery Usage Specifications for the reserve capacity rating of the original equipment battery.