Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Battery Cable Clip Stud | 10 N.m | 89 lb in |
| Battery Hold-Down Retainer Bolt | 25 N.m | 18 lb ft |
| Engine Harness Lead to Generator Nut | 20 N.m | 15 lb ft |
| Front Fender Rear Bracket Bolt | 20 N.m | 15 lb ft |
| Generator Bolt | 22 N.m | 16 lb ft |
| Negative Battery Cable Nut | 17 N.m | 13 lb ft |
| Negative Battery Cable Ground Bolt | 10 N.m | 89 lb in |
| Negative Battery Cable Ground Nut | 17 N.m | 13 lb ft |
| Positive Battery Cable Nut | 17 N.m | 13 lb ft |
| Positive Cable to Starter Solenoid Nut | 10 N.m | 89 lb in |
| Starter Bolt | 40 N.m | 30 lb ft |
| Starter Solenoid S Terminal Nut | 3 N.m | 27 lb in |
Fastener Tightening Specifications
Reserve Capacity
Reserve capacity is the amount of time in minutes it takes a fully charged battery, being discharged at a constant rate of 25 amperes and a constant temperature of 27°C (80°F), to reach a terminal voltage of 10.5 volts. Refer to Battery Usage for the reserve capacity rating of the original equipment battery.