Ignition System Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Spark Plug Wire Resistance | V | |
| Spark Plug Gap | 1.52 mm | 0.060 in |
| Refer to ENGINE MECHANICAL - 3.5L for additional specifications | ||
Ignition System Specifications
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Accelerator Pedal Nut | 10 N.m | 89 lb in |
| Air Cleaner Assembly Bolt | 10 N.m | 89 lb in |
| Air Cleaner Cover Screw | 5 N.m | 44 lb in |
| Air Cleaner Duct Clamps | 2 N.m | 18 lb in |
| Air Intake Duct Bolt | 10 N.m | 89 lb in |
| Camshaft Position (CMP) Sensor Bolt | 10 N.m | 89 lb in |
| Crankshaft Position (CKP) Sensor Bolt | 11 N.m | 97 lb in |
| Engine Coolant Temperature (ECT) Sensor | 20 N.m | 15 lb ft |
| Evaporative Emission (EVAP) Canister Purge Valve Bolt | 10 N.m | 89 lb in |
| Evaporative Emission (EVAP) Canister Vent Solenoid Valve Bolt | 10 N.m | 89 lb in |
| Exhaust Gas Recirculation (EGR) Pipe Bolt | 25 N.m | 18 lb ft |
| Exhaust Gas Recirculation (EGR) Valve Bolt | 30 N.m | 22 lb ft |
| Fuel Filler Hose Clamp | 4 N.m | 35 lb in |
| Fuel Filler Pipe Screw | 10 N.m | 89 lb in |
| Fuel Rail Bolt | 10 N.m | 89 lb in |
| Fuel Tank Filler Pocket Bolt | 1.5 N.m | 13 lb in |
| Fuel Tank Strap Bolt | 20 N.m | 15 lb ft |
| Heated Oxygen Sensors (HO2S) | 41 N.m | 30 lb ft |
| Heater Pipe Nut-to-Throttle Body | 25 N.m | 18 lb ft |
| Ignition Coil to Ignition Control Module Screws | 4.5 N.m | 40 lb in |
| Knock Sensor (KS) | 25 N.m | 18 lb ft |
| Manifold Absolute Pressure (MAP) Sensor Screw | 6.5 N.m | 57 lb in |
| Spark Plug | ||
| New Cylinder Head | 20 N.m | 15 lb ft |
| Used Cylinder Head | 15 N.m | 11 lb ft |
| Throttle Body Bolt/Nut | 10 N.m | 89 lb in |
Fastener Tightening Specifications