Home/Pontiac/Aztek/Pontiac Aztek I (2001-2005)/Repair manual/Removal & Installation/Engine Controls - Removal & Installation: Specifications
Contents Wiring diagrams Section: Removal & Installation All sections

Engine Controls - Removal & Installation: Specifications Pontiac Aztek I

TORQUE SPECIFICATIONS

ApplicationFt. Lbs. (N.m)
Catalytic Converter Nuts25 (34)
Crankshaft Balancer Bolt(1) 52 (70)
EGR Valve Bolt22 (30)
EGR Valve Pipe Bolt/Nut18 (25)
Engine Coolant Temperature Sensor15 (20)
Engine Mount Strut Bolt/Nut35 (48)
Frame Bolts
Front Bolts114 (155)
Rear Bolts177 (240)
Fuel Feed Pipe Nut At Fuel Rail13 (17)
Fuel Filler Pipe Attaching Nut/Screw18 (25)
Fuel Return Pipe Nut At Pressure Regulator13 (17)
Fuel Tank Strap Bolts35 (47)
Heated Oxygen Sensor30 (41)
Knock Sensor14 (19)
Power Steering Mounting Bolts25 (34)
Spark Plug(2)
Throttle Body Bolts/Nuts21 (28)
Wheel Lug Nuts100 (140)
INCH Lbs. (N.m)
Accelerator Control Cable Bracket (3)
Bolt115 (13.0)
Nut89 (10.0)
Accelerator Controls Pedal Bolts/Nuts27 (3.0)
Air Cleaner Housing Assembly Bolts89 (10.0)
Air Cleaner Intake Duct Clamps18 (2.0)
Camshaft Position Sensor71 (8.0)
Crankshaft Position Sensor "A" (24X)89 (10.0)
Crankshaft Position Sensor "B" (7X)97 (11)
EVAP Canister Purge Solenoid Bolt89 (10.0)
EVAP Canister Retaining Nut89 (10.0)
Front Fender Diagonal Brace-To-Inner Fender Bolts89 (10.0)
Front Fender Diagonal Brace-To-Radiator Support Bolts89 (10.0)
Fuel Filler Pipe Hose Clamp22 (2.5)
Fuel Pressure Regulator Screw76 (8.5)
Fuel Rail Bolt89 (10.0)
Fuel Sender Shield Nuts53 (6.0)
Idle Air Control Valve27 (3.0)
Ignition Control Module Mounting Screw40 (4.5)
Ignition Coil Mounting Screw40 (4.5)
Manifold Absolute Pressure Sensor Screws27 (3.0)
PCM Connector Screw71 (8.0)
Throttle Position Sensor Bolts18 (2.0)
Transaxle Fluid Filler Tube Bolt/Nut115 (13.0)

TORQUE SPECIFICATIONS