Communication with TEP 92 / DIAG 2000
- Actuator test - no OK
- Measure parameters - no OK
| detection condition(s) | checks conditions for checking |
|---|---|
| engine running | verify: - knock detection function - if correct, replace the control unit |
Contents
Wiring diagrams Section: Power unit- Identification: belt tension
- Removing - refitting: ancillary drive belt (power assisted steering - air conditioning)
- Removal - refitting: ancillary drive belt (power steering - with air conditioning)
- Removing - refitting: ancillary drive belt (power assisted steering - air conditioning) — variant 2
- Presentation: engine (ES9J4)
- Identification - tightening torques: engine
- Engine identification - tightening torques
- Identification - tightening torques engine (XU10J2, XU10J4R, XU10J2TE)
- Identification - tightening torque(s): engine
- Identification: engine identification
- Presentation: engine
- Presentation: engine (07.1998+)
- Identification - tightening torques: engine assembly mountings - gearbox
- Identification of tightening torques
- Identification of tightening torques — variant 2
- Identification, data, tightening torque(s): engine
- Launch assistance operation (ES9J4)
- Identification - tightening torques: engine (ES9J4)
- Tightening of clips: turbocharger inlet outlet pipe/inlet manifold
- Configuration: engine ECU
- Configuration: engine management control unit
- Check - adjustment front flexible mounts (XU102C, XU10J4R, XU10J2TE, XU10J2)
- Check - adjustment front flexible mounts
- Removing - refitting: power unit
- Removal - refitting: power unit
- Removing - refitting: power unit — variant 2
- Removal - refitting: power unit — variant 2
- Removing - refitting: power unit — variant 3
- Removal - refitting: lip seals
- Removing - refitting: lip seals
- Removing - refitting: style cover (ES9J4)
- Removing - refitting power unit (ES9J4)
- Removing - refitting power unit — variant 4
- Removing - refitting engine suspension
- Removing - refitting: engine (XU102C, XU10J4R, XU10J2TE, XU10J2)
- Removing - refitting: engine
- Data: lubrication
- Check: oil tightness of the engines and gearboxes
- Suction draining: engine
- Suction draining: engine — variant 2
- Description and operation of the gas injection
- Operation of the expansion/relief valve
- Operation of the expansion/relief valve — variant 2
- Plate diffuser
- Plate diffuser — variant 2
- Operation of the ECU
- Operation of the ECU — variant 2
- Foreword
- Foreword — variant 2
- ECU terminals
- ECU terminals — variant 2
- Composition: induction circuit
- Composition: air inlet circuit
- Data - identification injectors
- Update no. 9: Peugeot on-board fault recorder (TEP 92)
- Data: injection pump
- Data: injection pump — variant 2
- Installation of components under the bonnet
- Installation of components under the bonnet — variant 2
- Modification to the component: 55 way blue adaptor for BIP 722 (XUD11BTE)
- Modification to passive safety: fuel supply
- Updating the Peugeot on-board fault recorder (TEP 92): CD ROM 96.2
- Update DIAG 2000: CD ROM 96.4
- Down-loading of the control unit
- Setting of units: under bonnet
- Position of components: under bonnet
- Update DIAG 2000: CD ROM 97.4
- Update DIAG 2000: CD ROM 98.2
- Update DIAG 2000: CD ROM 98.3
- Engine
- Engine — variant 2
- Update DIAG 2000: CD ROM 98.5
- ECU terminals — variant 3
- ECU terminals — variant 4
- Updating the (TEP92) on-board tester by CD ROM 99.1
- Updating the (TEP92) on-board tester by CD ROM 99.1 — variant 2
- Latest update of the (TEP92) on-board fault recorder (TEP92) by CD ROM 99.5
- Latest update of the (TEP92) on-board fault recorder (TEP92) by CD ROM 99.5 — variant 2
- Data injection pump — variant 3
- Check: inlet air thermistor function
- Check: inlet air thermistor function — variant 2
- Check: coolant thermistor function
- Check: coolant thermistor function — variant 2
- Check: idle regulation stepper motor function
- Check: idle regulation stepper motor function — variant 2
- Check: throttle potentiometer function
- Check: throttle potentiometer function — variant 2
- Check: vehicle speed sensor function
- Check: vehicle speed sensor function — variant 2
- Checks: fuel system
- Check: mixture regulation auto-adaptation function
- Check: mixture regulation auto-adaptation function — variant 2
- Procedure 038Z - check: cruise control function
- Procedure 053Z - check: battery voltage
- Check: engine speed sensor function
- Check: engine speed sensor function — variant 2
- Procedure 054Z - check: injection electronic control unit
- Check: injector 1 - 4 control function
- Check: 1 - 4 injectors control function
- Procedure 057Z - check: atmospheric pressure sensor function
- Check: injector 2 - 3 control function
- Check: 2 - 3 injectors control function
- Check: 1 - 4 ignition coil control
- Check: 1 - 4 ignition coil control — variant 2
- Check: 2 - 3 ignition coil control
- Check: 2 - 3 ignition coil control — variant 2
- Check: knock detection function
- Check: knock detection function — variant 2
- Check: knock module function
- Check: knock module function — variant 2
- Check: oxygen sensor function
- Check: oxygen sensor function — variant 2
- Check: mixture regulation function
- Check: mixture regulation function — variant 2
- Check: canister bleed solenoid valve control function
- Check: purge canister solenoid valve control function
- Ignition shunt function check
- Ignition shunt function check — variant 2
- Check: battery voltage
- Check: battery voltage — variant 2
- Check: injection-ignition control unit function
- Check: injection-ignition control unit function — variant 2
- Check: function knock module
- Check: function knock module — variant 2
- Check: function - down-loading of the control unit
- Check: function - down-loading of the control unit — variant 2
- Check: inlet air thermistor function — variant 3
- Check: inlet air thermistor function — variant 4
- Check: coolant thermistor function — variant 3
- Check: coolant thermistor function — variant 4
- Check: fuel pump relay control function
- Check: fuel pump relay control function — variant 2
- Check: throttle potentiometer function — variant 3
- Check: throttle potentiometer function — variant 4
- Check: vehicle speed sensor function — variant 3
- Check: vehicle speed sensor function — variant 4
- Check: stepper motor control function
- Check: stepper motor control function — variant 2
- Check: mixture regulation auto-adaptation function — variant 3
- Check: mixture regulation auto-adaptation function — variant 4
- Check: inlet manifold pressure sensor function
- Check: inlet manifold pressure sensor function — variant 2
- Check: canister bleed solenoid valve control function — variant 2
- Check: purge canister solenoid valve control function — variant 2
- Check: engine speed sensor function — variant 3
- Check: engine speed sensor function — variant 4
- Check: battery voltage function
- Check: battery voltage function — variant 2
- Check
- Check: no. 1 cylinder reference sensor function
- Check: injector 1 control function
- Check: 1 injectors control function
- Check: injector 2 control function
- Check: 2 injectors control function
- Check: injector 3 control function
- Check: 3 injectors control function
- Check: injector 4 control function
- Check: 4 injectors control function
- Check: the gearbox ECU manages the following functions
- Check: idle regulation function
- Check: knock detection function — variant 3
- Check: knock detection function — variant 4
- Check: upstream oxygen sensor function
- Check: upstream oxygen sensor function — variant 2
- Check: engine speed sensor function — variant 5
- Check: engine speed sensor function — variant 6
- Check: upstream oxygen sensor function (ageing)
- Check: upstream oxygen sensor function (ageing) — variant 2
- Check: vehicle speed sensor function — variant 5
- Check: vehicle speed sensor function — variant 6
- Check: downstream oxygen sensor function
- Check: downstream oxygen sensor function — variant 2
- Check: knock detection function — variant 5
- Check: knock detection function — variant 6
- Check: downstream oxygen sensor function (ageing)
- Check: downstream oxygen sensor function (ageing) — variant 2
- Check: canister bleed solenoid valve control function — variant 3
- Check: purge canister solenoid valve control function — variant 3
- Check: injection-ignition control unit function — variant 3
- Check: injection-ignition control unit function — variant 4
- Check: power steering information function
- Check: power steering information function — variant 2
- Check: oxygen sensor function — variant 3
- Check: oxygen sensor function — variant 4
- Check: injection-ignition control unit function (ignition shunt)
- Check: injection-ignition control unit function (ignition shunt) — variant 2
- Check: 1 - 4 ignition coil control function
- Check: 1 - 4 ignition coil control function — variant 2
- Check: 2 - 3 ignition coil control function
- Check: 2 - 3 ignition coil control function — variant 2
- Checks: idling - emission control
- Checks: idling - emission control — variant 2
- Check: upstream oxygen sensor heating command function
- Check: upstream oxygen sensor heater control function
- Check: downstream oxygen sensor heater control function
- Check: downstream oxygen sensor heater control function — variant 2
- Check: air pump relay control function
- Check: air pump relay control function — variant 2
- Check: diagnostic warning light control function
- Check: diagnostic warning light control function — variant 2
- Check: knock stop function
- Check: knock stop function — variant 2
- Check: ECU configuration function
- Check: ECU configuration function — variant 2
- Check: catalytic converter function
- Check: catalytic converter function — variant 2
- Check: ignition misfire function (no. 1 cylinder - no. 2 cylinder - no. 3 cylinder - no. 4 cylinder)
- Check: ignition misfire function (no. 1 cylinder - no. 2 cylinder - no. 3 cylinder - no. 4 cylinder) — variant 2
- Check: exhaust air injection function
- Check: exhaust air injection function — variant 2
- Check: body accelerometer function
- Check: body accelerometer function — variant 2
- Check: ignition misfire function
- Check: ignition misfire function — variant 2
- Check: coolant thermistor function — variant 5
- Check: coolant thermistor function — variant 6
- Check: throttle potentiometer function — variant 5
- Check: throttle potentiometer function — variant 6
- Check: inlet air thermistor function — variant 5
- Check: inlet air thermistor function — variant 6
- Check: inlet manifold pressure sensor function — variant 3
- Check: inlet manifold pressure sensor function — variant 4
- Check: engine speed sensor function — variant 7
- Check: engine speed sensor function — variant 8
- Check: injector control function
- Check: injectors control function
- Check: knock detection function (XU engine)
- Check: knock detection function (engine XU)
- Check: oxygen sensor function — variant 5
- Check: oxygen sensor function — variant 6
- Check: battery voltage function — variant 3
- Check: battery voltage function — variant 4
- Check: injector control function unit A (1-5)
- Check: injectors control function unit A (1-5)
- Check: torque reduction function
- Check: torque reduction function — variant 2
- Check: idle speed actuator control function
- Check: idle speed actuator control function — variant 2
- Check: the gearbox ECU manages the following functions (XU engine)
- Check: idle regulation function (engine XU)
- Check: inlet air thermistor function — variant 7
- Check: inlet air thermistor function — variant 8
- Check: idle regulation solenoid valve function (TU engine)
- Check: idle regulation solenoid valve function (engine TU)
- Check: coolant thermistor function — variant 7
- Check: coolant thermistor function — variant 8
- Check: (XU engine)
- Check: knock regulation function (engine XU)
- Check: throttle potentiometer function — variant 7
- Check: throttle potentiometer function — variant 8
- Check: mixture regulation function — variant 3
- Check: mixture regulation function — variant 4
- Check: inlet manifold pressure sensor function — variant 5
- Check: inlet manifold pressure sensor function — variant 6
- Check: injection-ignition control unit function — variant 5
- Check: injection-ignition control unit function — variant 6
- Check: injection-ignition control unit function (knock sensor module) (XU engine)
- Check: injection-ignition control unit function (knock sensor module) (engine XU)
- Check: injection-ignition control unit function — variant 7
- Check: injection-ignition control unit function — variant 8
- Check: injector control function unit B (2-6)
- Check: injectors control function unit B (2-6)
- Check: inlet air thermistor function — variant 9
- Check: inlet air thermistor function — variant 10
- Check: injector control function unit C (3-4)
- Check: injectors control function unit C (3-4)
- Check: coolant thermistor function — variant 9
- Check: coolant thermistor function — variant 10
- Check: ignition control unit A (1-5)
- Check: ignition control unit A (1-5) — variant 2
- Check: fuel pump relay control function — variant 3
- Check: fuel pump relay control function — variant 4
- Check: ignition control unit B (2-6)
- Check: ignition control unit B (2-6) — variant 2
- Check: throttle potentiometer function — variant 9
- Check: throttle potentiometer function — variant 10
- Check: ignition control unit C (3-4)
- Check: ignition control unit C (3-4) — variant 2
- Check: idle regulation stepper motor function — variant 3
- Check: idle regulation stepper motor function — variant 4
- Check: fuel pump relay control function — variant 5
- Check: fuel pump relay control function — variant 6
- Check: vehicle speed sensor function — variant 7
- Check: vehicle speed sensor function — variant 8
- Check: electronic automatic gearbox information
- Check: electronic automatic gearbox information — variant 2
- Check: inlet manifold pressure sensor function — variant 7
- Check: inlet manifold pressure sensor function — variant 8
- Check: oxygen sensor heating relay control function
- Check: oxygen sensor heating relay control function — variant 2
- Check: 2 - 3 ignition coil control function — variant 3
- Check: 2 - 3 ignition coil control function — variant 4
- Checks: fuel system — variant 2
- Checks: fuel system — variant 3
- Check: no. 1 injector control function
- Check: no. 1 injector control function — variant 2
- Check: no. 2 injector control function
- Check: no. 2 injector control function — variant 2
- Check: no. 3 injector control function
- Check: no. 3 injector control function — variant 2
- Check: no. 4 injector control function
- Check: no. 4 injector control function — variant 2
- Check: oxygen sensor function — variant 7
- Check: oxygen sensor function — variant 8
- Check: purge canister solenoid valve function
- Check: purge canister solenoid valve function — variant 2
- Check: engine speed sensor function — variant 9
- Check: engine speed sensor function — variant 10
- Check: knock detection function — variant 7
- Check: knock detection function — variant 8
- Check: 1 - 4 ignition coil control function — variant 3
- Check: 1 - 4 ignition coil control function — variant 4
- Check: function: position of EGR solenoid valve
- Check: function: position of EGR solenoid valve — variant 2
- Check: function: EGR solenoid valve control
- Check: function: EGR solenoid valve control — variant 2
- Check: sensor supply function
- Check: sensor supply function — variant 2
- Check: battery voltage — variant 3
- Check: battery voltage — variant 4
- Check: ignition injection control unit
- Check: ignition injection control unit — variant 2
- Check: electronic engine immobiliser dialogue
- Check: electronic engine immobiliser dialogue — variant 2
- Checks: fuel system — variant 4
- Check: oxygen sensor heater control function
- Check: oxygen sensor heater control function — variant 2
- Check: mixture regulation function — variant 5
- Check: mixture regulation function — variant 6
- Check — variant 2
- Check: no. 1 cylinder reference sensor function — variant 2
- Check: immobiliser code storing
- Check: immobiliser code storing — variant 2
- Check: power steering stop information
- Check: power steering stop information — variant 2
- Check: cooling fan status
- Check: cooling fan status — variant 2
- Check: fan relay control function 1, fan relay control function 2
- Check: fan relay control function 1, fan relay control function 2 — variant 2
- Check: coolant thermistor function — variant 11
- Check: coolant thermistor function — variant 12
- Check: coolant thermistor function — variant 13
- Check: coolant thermistor function — variant 14
- Check: fuel pump relay control function — variant 7
- Check: fuel pump relay control function — variant 8
- Check: throttle potentiometer function — variant 11
- Check: throttle potentiometer function — variant 12
- Check: throttle potentiometer function — variant 13
- Check: throttle potentiometer function — variant 14
- Check: idle regulation stepper motor function — variant 5
- Check: idle regulation stepper motor function — variant 6
- Check: idle regulation stepper motor function — variant 7
- Check: idle regulation stepper motor function — variant 8
- Check: vehicle speed sensor function — variant 9
- Check: vehicle speed sensor function — variant 10
- Check: mixture auto-adaptation function
- Check: mixture auto-adaptation function — variant 2
- Check: mixture auto-adaptation function — variant 3
- Check: mixture auto-adaptation function — variant 4
- Procedure 017Z, check: EGR regulation function
- Procedure 017Z, check: EGR regulation function — variant 2
- Check: inlet manifold pressure sensor function — variant 9
- Check: inlet manifold pressure sensor function — variant 10
- Procedure 018Z - check: power output function (short circuit to + battery)
- Procedure 018Z - check: power output function (short circuit to battery positive)
- Check: inlet manifold pressure sensor function — variant 11
- Check: inlet manifold pressure sensor function — variant 12
- Procedure 079B - 079G - 079Z, check: air flow meter function
- Procedure 079B - 079G - 079Z, check: air flow meter function — variant 2
- Check: engine speed sensor function — variant 11
- Check: engine speed sensor function — variant 12
- Check: engine speed sensor function — variant 13
- Check: engine speed sensor function — variant 14
- Check: accelerator pedal sensor function
- Check: accelerator pedal sensor function — variant 2
- Check: diagnostic warning light control function — variant 3
- Check: diagnostic warning light control function — variant 4
- Check: function: coolant temperature warning lamp (towards the built-in systems interface)
- Check: function: coolant temperature warning lamp (towards the built-in systems interface) — variant 2
- Check: function: engine coolant temperature information (towards the built-in systems interface)
- Check: function: engine coolant temperature information (towards the built-in systems interface) — variant 2
- Procedure 025Z - check: brake switch function
- Procedure 025Z - check: brake switch function — variant 2
- Check: function: engine speed information (towards the built-in systems interface)
- Check: function: engine speed information (towards the built-in systems interface) — variant 2
- Procedure 026Z - check: clutch switch function
- Procedure 026Z - check: clutch switch function — variant 2
- Check: function: air conditioning authorisation (towards the built-in systems interface)
- Check: function: air conditioning authorisation (towards the built-in systems interface) — variant 2
- Naming of components
- Check: vehicle speed sensor function — variant 11
- Check: vehicle speed sensor function — variant 12
- Check: inlet air thermistor function — variant 11
- Check: inlet air thermistor function — variant 12
- Check: inlet manifold pressure sensor function — variant 13
- Check: inlet manifold pressure sensor function — variant 14
- Check: coolant thermistor function — variant 15
- Check: coolant thermistor function — variant 16
- Check: throttle potentiometer function — variant 15
- Check: throttle potentiometer function — variant 16
- Procedure 036B / 036G - check: diesel fuel thermistor function
- Procedure 036B / 036G - check: diesel fuel thermistor function — variant 2
- Check: idle speed actuator control function — variant 3
- Check: idle speed actuator control function — variant 4
- Check: electric stop function
- Check: electric stop function — variant 2
- Check: vehicle speed sensor function — variant 13
- Check: vehicle speed sensor function — variant 14
- Check: mixture regulation function — variant 7
- Check: mixture regulation function — variant 8
- Check: mixture regulation auto-adaptation function — variant 5
- Check: mixture regulation auto-adaptation function — variant 6
- Procedure 038Z - check: cruise control function — variant 2
- Check: inlet manifold pressure sensor function — variant 15
- Check: inlet manifold pressure sensor function — variant 16
- Check: engine speed sensor function — variant 15
- Check: engine speed sensor function — variant 16
- Check: injectors control function group A (1 - 5)
- Check: injectors control function group A (1 - 5) — variant 2
- Check: injectors control function group B (2 - 6)
- Check: injectors control function group B (2 - 6) — variant 2
- Check: injectors control function group C (3 - 4)
- Check: injectors control function group C (3 - 4) — variant 2
- Check: group A (1 - 5) ignition control function
- Check: group A (1 - 5) ignition control function — variant 2
- Check: group B (2 - 6) ignition control function
- Check: group B (2 - 6) ignition control function — variant 2
- Check: group C (3 - 4) ignition control function
- Check: group C (3 - 4) ignition control function — variant 2
- Check — variant 3
- Check: knock regulation function
- Check: knock module function — variant 3
- Check: knock module function — variant 4
- Check: knock detection function — variant 9
- Check: knock detection function — variant 10
- Check: engine speed sensor function — variant 17
- Check: engine speed sensor function — variant 18
- Procedure 043Z - check: advance solenoid valve function
- Procedure 043Z - check: advance solenoid valve function — variant 2
- Check: ignition shunt function
- Check: ignition shunt function — variant 2
- Procedure 051B / 051G - check: slide position function
- Procedure 051B / 051G - check: slide position function — variant 2
- Check: oxygen sensor heating relay control function — variant 3
- Check: oxygen sensor heating relay control function — variant 4
- Check: the gearbox ECU manages the following functions — variant 2
- Check: idle regulation function — variant 2
- Procedure 052Z - check: delivery regulation function
- Procedure 052Z - check: delivery regulation function — variant 2
- Check — variant 4
- Check: fuel pump control function
- Check: electronic automatic gearbox information — variant 3
- Check: electronic automatic gearbox information — variant 4
- Check: oxygen sensor function — variant 9
- Check: oxygen sensor function — variant 10
- Check: injection-ignition control unit function — variant 9
- Check: injection-ignition control unit function — variant 10
- Check: purge canister solenoid valve function — variant 3
- Check: purge canister solenoid valve function — variant 4
- Check: purge canister solenoid valve function — variant 5
- Check: purge canister solenoid valve function — variant 6
- Check: injector control function — variant 2
- Check: injectors control function — variant 2
- Check: 1 ignition coil control function
- Check: 1 ignition coil control function — variant 2
- Procedure 053Z - check: battery voltage — variant 2
- Check: 2 ignition coil control function
- Check: 2 ignition coil control function — variant 2
- Check: no. 1 - 4 injector control function
- Check: no. 1 - 4 injector control function — variant 2
- Check: no. 2 - 3 injector control function
- Check: no. 2 - 3 injector control function — variant 2
- Check: oxygen sensor function — variant 11
- Check: oxygen sensor function — variant 12
- Procedure 054Z - check: injection ECU
- Procedure 057Z - check: atmospheric pressure sensor function — variant 2
- Procedure 058Z - check: pre/post heating function
- Procedure 058Z - check: pre/post heating function — variant 2
- Procedure 065Z - check: needle lift sensor function
- Procedure 065Z - check: needle lift sensor function — variant 2
- Check: mixture regulation function — variant 9
- Check: mixture regulation function — variant 10
- Check: mixture regulation function — variant 11
- Check: mixture regulation function — variant 12
- Check: battery voltage — variant 5
- Check: battery voltage — variant 6
- Check: injection-ignition control unit function — variant 11
- Check: injection-ignition control unit function — variant 12
- Check: fuel pump relay control function — variant 9
- Check: fuel pump relay control function — variant 10
- Check: 1 - 4 ignition coil control function — variant 5
- Check: 1 - 4 ignition coil control function — variant 6
- Check: 2 - 3 ignition coil control function — variant 5
- Check: 2 - 3 ignition coil control function — variant 6
- Check: knock detection function — variant 11
- Check: knock detection function — variant 12
- Check: knock regulation function — variant 2
- Check: knock regulation function — variant 3
- Check: power steering stop information — variant 3
- Check: power steering stop information — variant 4
- Check: air conditioning information function
- Check: air conditioning information function — variant 2
- Check: mixture regulation function — variant 13
- Check: mixture regulation function — variant 14
- Check: throttle control function
- Check: throttle control function — variant 2
- Flow meter signal function check
- Flow meter signal function check — variant 2
- Check: throttle potentiometer function — variant 17
- Check: throttle potentiometer function — variant 18
- Check: vehicle speed sensor function — variant 15
- Check: vehicle speed sensor function — variant 16
- Check: mixture regulation auto-adaptation function (additive, multiplicative)
- Check: mixture regulation auto-adaptation function (additive, multiplicative) — variant 2
- Check: inlet manifold pressure sensor function — variant 17
- Check: inlet manifold pressure sensor function — variant 18
- Check: canister bleed solenoid valve control function — variant 4
- Check: purge canister solenoid valve control function — variant 4
- Check: engine speed sensor function — variant 19
- Check: engine speed sensor function — variant 20
- Check: injector control function — variant 3
- Check: injectors control function — variant 3
- Check: knock detection function — variant 13
- Check: knock detection function — variant 14
- Check: mixture regulation function — variant 15
- Check: mixture regulation function — variant 16
- Check: battery voltage — variant 7
- Check: battery voltage — variant 8
- Check: injection-ignition control unit function — variant 13
- Check: injection-ignition control unit function — variant 14
- Check: the gearbox ECU manages the following functions — variant 3
- Check: idle regulation function — variant 3
- Check: idle regulation valve function
- Check: idle regulation valve function — variant 2
- Check: mixture regulation function — variant 17
- Check: mixture regulation function — variant 18
- Check: inlet manifold pressure sensor function — variant 19
- Check: inlet manifold pressure sensor function — variant 20
- Check — variant 5
- Check: knock regulation function — variant 4
- Check — variant 6
- Check: knock regulation function — variant 5
- Check: turbo pressure solenoid valve function
- Check: turbo pressure solenoid valve function — variant 2
- Check: turbo pressure regulation function
- Check: turbo pressure regulation function — variant 2
- Check: function battery voltage
- Check: function battery voltage — variant 2
- Check: inlet air thermistor function — variant 13
- Check: inlet air thermistor function — variant 14
- Check: positive voltage after ignition on
- Check: positive voltage after ignition on — variant 2
- Check supply relay function
- Check supply relay function — variant 2
- Check: diesel fuel thermistor function
- Check: diesel fuel thermistor function — variant 2
- Check: calibration resistor function
- Check: calibration resistor function — variant 2
- Check: cam loop check function
- Check: cam loop check function — variant 2
- Check: cam 1 position sensor function
- Check: cam 1 position sensor function — variant 2
- Check: cam 2 position sensor function
- Check: cam 2 position sensor function — variant 2
- Check: flow loop rotor check function
- Check: flow loop rotor check function — variant 2
- Check: rotor 1 position sensor function
- Check: rotor 1 position sensor function — variant 2
- Check: rotor 2 position sensor function
- Check: rotor 2 position sensor function — variant 2
- Check: rotor 3 position sensor function
- Check: rotor 3 position sensor function — variant 2
- Check: control unit supply function
- Check: control unit supply function — variant 2
- Check: post-heating cut-off function
- Check: post-heating cut-off function — variant 2
- Check: needle lift signal consistency function
- Check: needle lift signal consistency function — variant 2
- Check: needle lift lost function
- Check: needle lift lost function — variant 2
- Check: pump timing function
- Check: pump timing function — variant 2
- Check: sensor supply function — variant 3
- Check: sensor supply function — variant 4
- Check: air conditioning cut-off function
- Check: air conditioning cut-off function — variant 2
- Check: EGR solenoid valve function
- Check: EGR solenoid valve function — variant 2
- Check: tachometer function
- Check: tachometer function — variant 2
- Check: after opening the diesel circuit
- Check: after opening the diesel circuit — variant 2
- Adjustment: injection pump
- Adjustment: injection pump — variant 2
- Check: the gearbox ECU manages the following functions — variant 4
- Check: idle regulation function — variant 4
- Check: function trip computer
- Check: function trip computer — variant 2
- Check - adjustment idling - richness (XU10J2, XU102C)
- Check: rotor MINI position sensor function
- Check: rotor MINI position sensor function — variant 2
- Check: injection-ignition control unit function — variant 15
- Check: injection-ignition control unit function — variant 16
- Check: oxygen sensor function — variant 13
- Check: oxygen sensor function — variant 14
- Check: inlet manifold pressure sensor function — variant 21
- Check: inlet manifold pressure sensor function — variant 22
- Check: inlet air thermistor function — variant 15
- Check: inlet air thermistor function — variant 16
- Check: coolant thermistor function — variant 17
- Check: coolant thermistor function — variant 18
- Check: throttle potentiometer function — variant 19
- Check: throttle potentiometer function — variant 20
- Check: vehicle speed sensor function — variant 17
- Check: vehicle speed sensor function — variant 18
- Check: mixture regulation auto-adaptation function — variant 7
- Check: mixture regulation auto-adaptation function — variant 8
- Check: injector control function — variant 4
- Check: injectors control function — variant 4
- Check: engine speed sensor function — variant 21
- Check: engine speed sensor function — variant 22
- Check: battery voltage — variant 9
- Check: battery voltage — variant 10
- Checks and adjustments: accelerator pedal sensor
- Checks and adjustments: accelerator pedal sensor — variant 2
- Checks and adjustments: correction 1 (idling speed)
- Checks and adjustments: correction 1 (idling speed) — variant 2
- Initialisation procedure: injection electronic control unit
- Initialisation procedure: injection ECU
- Timing: injection pump (XUD11BTE)
- Removal - fitting - timing: injection pump
- Removal - fitting - timing: injection pump — variant 2
- Removing - refitting injectors
- Removal - fitting - timing injection pump — variant 3
- Precautions to be taken: injection ignition
- Precautions to be taken: injection ignition — variant 2
- Precautions to be taken: injection ignition — variant 3
- Precautions to be taken: diesel injection
- Precautions to be taken: diesel injection — variant 2
- Precautions to be taken: injection ignition — variant 4
- Precautions to be taken: injection ignition — variant 5
- Precautions to be taken: injection ignition — variant 6
- Precautions to be taken: injection ignition — variant 7
- Precautions to be taken: injection ignition — variant 8
- Precautions to be taken
- Precautions to be taken — variant 2
- Precautions to be taken: injection-ignition — variant 9
- Precautions to be taken: injection-ignition — variant 10
- Schematic diagram
- Application: tools
- Setting up: tools
- Application: tools — variant 2
- Application: tools — variant 3
- Setting up: tools — variant 2
- Application: tools — variant 4
- Setting up: tools — variant 3
- Application: tools — variant 5
- Setting up: tools — variant 4
- Setting up: tools — variant 5
- Application: tools — variant 6
- Setting up: tools — variant 6
- Application: tools — variant 7
- Setting up: tools — variant 7
- Application: tools — variant 8
- Setting up: tools — variant 8
- Application: tools — variant 9
- Setting up: tools — variant 9
- Analysis: results
- Analysis: results — variant 2
- Analysis: results — variant 3
- Analysis: results — variant 4
- Analysis: results — variant 5
- Analysis: results — variant 6
- Analysis: results — variant 7
- Analysis: results — variant 8
- Analysis of the results
- Analysis of the results — variant 2
- Analysis: results — variant 9
- Analysis: results — variant 10
- Analysis: results — variant 11
- Analysis: results — variant 12
- Analysis: results — variant 13
- Analysis: results — variant 14
- Fault(s) reading
- Fault(s) reading — variant 2
- Measure parameters (XUD11BTE)
- Parameter measurements (XUD11BTE)
- Actuator test (XUD11BTE)
- Actuators test (XUD11BTE)
- Modification: DIESEL LUCAS EPIC (XUD11BTE)
- Actuator test -: DIESEL LUCAS EPIC (XUD11BTE)
- Identification: DIESEL LUCAS EPIC (XUD11BTE)
- Check: operation of brake switch correlation (only 605) (XUD11BTE)
- Measure parameters: DIESEL LUCAS EPIC (XUD11BTE)
- Schematic diagram: model
- Schematic diagram: model — variant 2
- Injection-ignition wiring diagram
- Injection-ignition wiring diagram — variant 2
- Wiring diagrams: injection ignition
- Modification: evaporator temperature sensor
- Wiring diagrams (XUD11BTE)
- Schematic diagram: diesel injection (XUD11BTE)
- Wiring diagrams: diesel injection (XUD11BTE)
- Schematic diagram: injection DIESEL (only 605) (XUD11BTE)
- Schematic diagram — variant 2
- Schematic diagram — variant 3
- Identification: system components
- Identification: system components — variant 2
- Components of the system
- Components of the system — variant 2
- Synopsis
- Summary of operation
- Help in diagnosis
- Help in diagnosis — variant 2
- Schematic diagram: injection-ignition
- Wiring diagrams: injection-ignition — variant 2
- Effects of the L4 tax incentive emission control standard on the injection system
- Effects of the L4 tax incentive emission control standard on the injection system — variant 2
- Components of the system — variant 3
- Components of the system — variant 4
- Diagram of ECU inputs
- Diagram of ECU inputs — variant 2
- Diagram of ECU outputs
- Diagram of ECU outputs — variant 2
- Components of the system — variant 5
- Components of the system — variant 6
- Help in diagnosis — variant 3
- Help in diagnosis — variant 4
- Foreword — variant 3
- Check: ignition advance
- Check: ignition advance — variant 2
- Check - adjustment ignition system (XU10J2, XU102C)
- Checks and adjustments: ignition advance
- Checks and adjustments: ignition advance — variant 2
- Removing - refitting spark plugs (ES9J4)
- Identification: engine oil filter cartridge
- Application: tooling
- Setting up: tooling
- Wiring diagrams: anti-lock brakes
- Schematic diagram: anti-lock brakes
- Removing - refitting ancillary drive belt (power assisted steering - air conditioning) — variant 3
- Precautions to be taken: automatic windscreen wiper
- Precautions to be taken: automatic windscreen wiper — variant 2
- : cruise control ((manual gearbox, DK5ATE engine))
- : coded anti-start (XUD11BTE, DK5ATE engines)
- Application: tools — variant 10
- Setting up: tools — variant 10
- Application: tools — variant 11
- Setting up: tools — variant 11
- Air vents
- Battery
- Body
- Bodywork
- Braking
- Comfort and convenience
- Confort
- Current generation
- Dashboard
- Driving assistance
- Electrical harnesses
- Engine
- Equipment
- Front anti -roll bar
- Front axle
- Front door trim
- Front doors
- Front seats
- Front section
- Front shock absorbers
- Gearbox assembly
- General points
- General points about the vehicle
- Glovebox
- Instrument panel
- Instruments and controls
- Lighting - signalling
- Mechanical
- Power unit
- Pre-heating
- Protections and doors
- Rear axle
- Rear parcel tray
- Rear section
- Rear shock absorbers
- Roof panel
- Side structure
- Starting
- Steering
- Suspension
- Transmission
- Washing and wiping