| KM-470-B | Angular Torque Wrench |
|---|---|
| Tightening of bolted connections with additional angle |
| CH-47658 | Clamping tool |
|---|---|
| For seizing the tie rod end fastening nut on the steering knuckle when installing and removing | |
| KM-161-B | Ball Joint Remover |
|---|---|
| Removal of tie rod end from steering knuckle | |
| MKM-610 | Torque Wrench – 1/2" drive, range: 30-130 Nm |
|---|---|
| Tightening of bolted connections to torque |
| MKM-611 | Torque Wrench – 3/8" drive, range: 10-60 Nm |
|---|---|
| Tightening of bolted connections to torque |
| MKM-669 | Torque Wrench – 1/2" drive, range: 50-300 Nm |
|---|---|
| Tightening of bolted connections to torque |
| MKM-883-1 | Engine Bridge |
|---|---|
| To hold/lower/lift engine to remove/install front axle body in conjunction with MKM-883-2 and MKM-883-3 |
| MKM-883-2 | Adapter Plate |
|---|---|
| To hold engine to remove/install front axle body in conjunction with MKM-883-1 and MKM-883-3 |
| MKM-883-3 | Accessory components to MKM-883-1 |
|---|---|
| To hold engine to remove/install front axle body in conjunction with MKM-883-1 and MKM-883-2 |
| KM-904 | Base Frame |
|---|---|
| To remove / install front axle body with KM-6312 and KM-6313 |
| KM-6312 | Centring Equipment |
|---|---|
| To remove / install and centre front axle body with KM-904 |
| KM-6321 | Tie Rod Wrench |
|---|---|
| Removal and installation of the tie rod from/to steering gear rack |
| MKM-J-6459-B | Torque Wrench – 3/8" drive, range: 0-11 Nm |
|---|---|
| Tightening of bolted connections to torque |
