B-06, Additional Functions Test Step T05 DATE Setting Opel Vectra B

B-06, Additional Functions Test Work Order Description Nominal Value T05 Tester Display Date Setting Para>the Diagnostic Tester Is Used to Set the Date in the Info Display. Ignition on Press Corresponding Key in the System Main Menu to Call Up Additional Functions, Select the Desired Test and Confirm with Enter. Follow the Instructions in the Diagnostic Tester Display. Note: the Diagnostic Tester Displays the Current Date of the Info Display. to Set the Date, You CAN Either Take-Over the Existing Date Setting from the Diagnostic Tester, or Adjust Manually by Using the Cursor Keys. Adjustment 1: to Accept the Date Adjusted in the Diagnostic Tester Press the Corresponding Soft Key. Confirm the Adjustment by Using the Corresponding Soft Keys. Adjustment 2: for Manual Date Adjustment with the Cursor Keys Press the Corresponding Soft Key. Follow the Instructions in the Diagnostic Tester Display. Confirm with Enter Confirm the Adjustment by Using the Corresponding Soft Keys. Para> Note: Days CAN Be Changed in the Range from 00 to 39. Months CAN Be Changed in the Range from 00 to 19. Years CAN Be Changed in the Range from 1994 to 2030. If There Is a Invalid Value Adjusted the Control Unit Conducts a Correction After a Short Period. This Causes an Adulteration of the Selected Value. in This Case the Adjustment Must Be Repeated. Adjustment Okay? Para> Concerned Terminals: - Yes: - No: C-04