Timing, Check (1.4 / 1.6 Ltr. Engine)
| .D. ICON01.tif | 0,75 | 0,75 | tiff;; Remove, Disconnect |
Ground lead from battery.
If present:
Air intake hose, air intake hood, air cleaner housing.
V-belt from alternator.
| .P. E3569.tif | 9 | 7,5 | tiff;; |
|---|---|---|---|
| .D. ICON01.tif | 0,75 | 0,75 | tiff;; Remove, Disconnect |
Version with power steering up to MY '93:
Mark operating direction of ribbed V-belt, remove ribbed V-belt.
Ribbed V-belt pulley (arrows) from power steering hydraulic pump.
Power steering hydraulic pump (arrows) from cylinder block - see operation
"Hydraulic Pump, Remove and Install" in group "M".
| .P. D0904.tif | 9 | 7,5 | tiff;; |
|---|---|---|---|
| .D. ICON01.tif | 0,75 | 0,75 | tiff;; Remove, Disconnect |
Engines as of MY '93:
Mark operating direction of ribbed V-belt.
Release tension in ribbed V-belt via ribbed V-belt tension roller in direction of arrow (clockwise) and remove ribbed V-belt.
| .P. D8076.tif | 9 | 7,5 | tiff;; |
|---|---|---|---|
| .D. ICON01.tif | 0,75 | 0,75 | tiff;; Remove, Disconnect |
Upper part of front toothed belt cover.
| .P. E3568.tif | 9 | 7,5 | tiff;; |
|---|---|---|---|
| .D. ICON08.tif | 0,75 | 0,75 | tiff;; Adjust |
Turn crankshaft in rotational direction of engine until piston of 1st cylinder is at "Ign. TDC".
Pointer on rear toothed belt cover aligns with notch on V-belt pulley.
Note:
On 14 NV, set V-belt pulley to first notch (10° BTDC).
| .P. C9810.tif | 9 | 7,5 | tiff;; |
|---|---|---|---|
| .D. ICON06.tif | 0,75 | 0,75 | tiff;; Inspect |
For X 16 SZ, "Ign. TDC" is marked on the increment disc.
1 - for version with V-belt pulley
2 - for version with ribbed V-belt pulley
Simultaneously, notch on camshaft gear must align with mark on rear toothed belt cover.
| .P. E5523.tif | 9 | 7,5 | tiff;; |