Con-rod, Replace
| .D. ICON01.tif | 0,75 | 0,75 | tiff;; Remove, Disconnect |
Remove piston with con-rod (1) - see operation
"Piston with Con-rod, Remove and Install".
| .P. E4653.tif | 9 | 7,5 | tiff;; |
|---|---|---|---|
| .D. ICON01.tif | 0,75 | 0,75 | tiff;; Remove, Disconnect |
Before removing piston pin, note installation position of con-rod.
Remove retaining ring (1) from piston boss with suitable tool.
Push piston pin out of piston boss.
| .P. E5291.tif | 9 | 7,5 | tiff;; |
|---|---|---|---|
| .D. ICON02.tif | 0,75 | 0,75 | tiff;; Install, Connect |
Insert piston pin (1) in piston boss.
Installation position:
Beads on con-rod point to flattened parts of piston pin boss.
| .P. E5292.tif | 9 | 7,5 | tiff;; |
|---|---|---|---|
| .D. ICON02.tif | 0,75 | 0,75 | tiff;; Install, Connect |
Insert retaining ring (1) in piston boss.
Install piston with con-rod - see operation
"Piston with Con-rod, Remove and Install".
| .P. E5291.tif | 9 | 7,5 | tiff;; |