Telephone Bracket - Replace (Upgrade Kit) Opel Tigra B

Remove

1. 1. Remove telephone cradle
2. 2. Remove glove compartment
3. 3. Remove base holder • Unscrew bolt (1) • Place basic holder to one side

4. 4. Detach positioning disc • Unscrew 2x bolt (1)

5. 5. Remove bracket • Unscrew bolt (1) • Release adhesive area (2) • Take out bracket

Install

6. 6. Install bracket • Insert bracket • Stick on adhesive area – Pull off protective film and stick on bracket • Drill hole, diameter 2.0 mm – I 35 mm – II 30 mm

7. 7. Install positioning disc • Screw in bolt (1) • Drill 2x hole (2) ø 2 mm • Tighten 2x screw • Unscrew bolt (1)

Note. The positioning disc serves as a drilling template.

8. 8. Install base holder • Tighten bolt
9. 9. Insert telephone cradle
10. 10. Glove compartment