Control Unit - Telephone System - Replace (Upgrade Kit) Opel Tigra B

Important: Replace or repair wiring harnesses observing the safety regulations of electrics/electronics .

Remove

1. 1. Disconnect battery.
2. 2. Remove glove compartment
3. 3. Remove control unit • Release control unit (3) – Release 2x cable tie (1, 2)

4. 4. Disconnect wiring harness plug • Disconnect 4x wiring harness plug (1, 2, 3, 4)

Install

5. 5. Connect control unit wiring harness plug • Connect 4x wiring harness plug (1, 2, 3, 4)
6. 6. Fit control unit • Position control unit (3) • Attach control unit using 2x cable tie (1, 2)

7. 7. Install glove compartment
8. 8. Connect battery.
9. 9. Program volatile memories
10. 10. Function control