Control Switch (Centre Console), Replace
Note:
The two control switches in the centre console each consists of a separate unit which can only be replaced as a whole.
right contol switch: (centre console)
1 Rocker switch - window winder front right right
2 Tip switch pinch guard OFF switch
3 Rocker switch - window winder rear right
left contol switch: (centre console)
4 Rocker switch - window winder rear left left
5 Safety switch (child safety lock)
6 Rocker switch - window winder front left
| Illustration C 3677 shows layout of control switches on OMEGA/CARLTON, but applies analogously to SENATOR - B. | |||
|---|---|---|---|
| .P. C3677.tif | 9 | 7,5 | tiff;; |
Remove centre console.
Remove or fold back rear covering from console.
On OMEGA/CARLTON vehicles remove 6 screws, on SENATOR - B vehicles 4 screws, and remove console.
On vehicles with manual transmission remove bellows from console and remove shift lever.
| On vehicies with automatic transmission remove insert for selector lever cover. Remove louvre and unscrew selector lever cover from console on OMEGA/CARLTON, release on SENATOR - B and remove. | |||
|---|---|---|---|
| .P. C3973.tif | 9 | 7,5 | tiff;; |
Illustration C 3973 shows centre console on OMEGA/CARLTON vehicles with manual transmission.
| Illustration C 6893 shows centre console on SENATOR - B with automatic transmission. | |||
|---|---|---|---|
| .P. C6893.tif | 9 | 7,5 | tiff;; |
Release all connections to wiring harness and disconnect.
1 Window winder right
2 Cigarette lighter rear
3 Board computer
4 Window winder left
| Illustration C 7376 shows layout on SENATOR- B, but applies analogously to OMEGA/CARLTON. | |||
|---|---|---|---|
| .P. C7376.tif | 9 | 7,5 | tiff;; |
Remove cover from console.
Press in catches and remove each of the control switches from the console cover.
Illustration C 7377 shows layout on SENATOR - B, but applies analogously to OMEGA/CARLTON.
Install
| Install analogously in reverse order. | |||
|---|---|---|---|
| .P. C7377.tif | 9 | 7,5 | tiff;; |