How to Program the Electronic Control Unit Opel Senator B

Electronic Control Unit, Program

Note:

No programming is necessary for OMEGA/CARLTON (MY 1987)

The electronic control unit for each window winder must be programmed separately each time

- the battery is reconnected

- fuse F 19 (front door window winders) and/or F 20 (rear door window winders) is replaced

- the window winders are reconnected to the vehicle electrical system

Programming:

Close all doors and switch ignition ON.

Close each window completely in turn by repeated pressing of the rocker switch.

Hold each rocker switch for at least 2 seconds more after each window is fully closed.

right contol switch: (centre console)

1 Rocker switch - window winder front right

2 Tip switch pinch guard OFF switch

3 Rocker switch - window winder rear right

left contol switch: (centre console)

4 Rocker switch - window winder rear left

5 Safety switch (child safety lock)

6 Rocker switch - window winder front left

Illustration C 3677 shows layout of control switches on OMEGE/CARLTON, but applies analogously to SENATOR - B.